Z-FIGHTER Accessory Board
About the Z-FIGHTER Accessory Board
Z-FIGHTER Accessory Board is an open source PCB design by tangent3D, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 75 mm, with 17 components from 16 distinct parts.
By type, the board carries 8 switches, 2 transistors, 2 connectors, 1 buzzer, 1 diode and 1 resistor.
It belongs with the keyboards, displays & leds and retro computing designs in this gallery.
From the project
Homebrew Z80 hobby computer
Z-FIGHTER Accessory Board bill of materials (BOM)
17 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | BC337 | TO-92_Inline_Wide | Q1, Q2 |
| 1 | ST7920 Graphic LCD | PinSocket_1x20_P2.54mm_Horizontal | J7 |
| 1 | Conn_02x13_Odd_Even | PinSocket_2x13_P2.54mm_Vertical | J9 |
| 1 | Buzzer | MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | 680Ω | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | RB1 |
| 1 | 820Ω | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | RB2 |
| 1 | Up (A0) | SW_Cherry_MX_1.00u_PCB | SW1 |
| 1 | Down (A1) | SW_Cherry_MX_1.00u_PCB | SW2 |
| 1 | Left (A2) | SW_Cherry_MX_2.00u_Vertical_PCB | SW3 |
| 1 | Right (A3) | SW_Cherry_MX_2.00u_Vertical_PCB | SW4 |
| 1 | A (A4) | SW_Cherry_MX_1.00u_PCB | SW5 |
| 1 | B (A5) | SW_Cherry_MX_1.00u_PCB | SW6 |
| 1 | C (A6) | SW_Cherry_MX_1.00u_PCB | SW7 |
| 1 | D (A7) | SW_Cherry_MX_1.00u_PCB | SW8 |
| 1 | IN5817 | D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | 10KΩ | R_Array_SIP9 | RN4 |
Z-FIGHTER Accessory Board design files
The KiCad project lives in the tangent3D/Z-FIGHTER repository on GitHub; these links point at the commit this page was built from.
Z-FIGHTER Accessory Board: common questions
How big is the Z-FIGHTER Accessory Board?
The Z-FIGHTER Accessory Board measures 100 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Z-FIGHTER Accessory Board?
17 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Z-FIGHTER Accessory Board design files?
From the tangent3D/Z-FIGHTER repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Z-FIGHTER Accessory Board design in my own project?
Yes, under the terms of its MIT license, which tangent3D chose for the repository.
More boards in Z-FIGHTER
Zf vga
143 × 85 mm52 parts2LMIT10
Z-FIGHTER Mainboard
100 × 150 mm43 parts2LMIT10
Usb serial power module
40 × 31 mm22 parts2LMIT10
Audio Loader
55.9 × 38.1 mm21 parts2LMIT10
Zf vga controller
100 × 50 mm15 parts2LMIT10
Baud Generator
16.5 × 41 mm6 parts2LMIT10
CF Adapter
27 × 53.3 mm3 parts2LMIT10
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
Protector
byrantech
32.2 × 15.4 mm6 parts2LMIT4.3k
Switch
18.5 × 11.1 mm5 parts2LMIT4.3k