Jolt2-pim left
About the Jolt2-pim left PCB
Jolt2-pim left is an open source PCB design by tangybbq, published on GitHub. It is a 2-layer board measuring 151 × 98 mm, with 42 components from 15 distinct parts.
Other key parts include the MAX40200AUK. By type, the board carries 31 connectors, 6 resistors, 2 switches, 2 diodes and 1 IC.
It belongs with the keyboards and power & battery designs in this gallery.
From the project
Design files for my keyboards
This repo captures the design files associated with my custom keyboards.
These keyboards are primarily focused on Steno input, mainly using Plover. In the spirit of open steno, I have made these designs open. Anyone is free to make designs based on these keyboards, for non-commercial purposes. I am releasing the designs under the CC BY-NC 3.0 license. Specifically, this means if you wish to sell a product based on the design, you should talk to me.
Main components on the Jolt2-pim left
Jolt2-pim left bill of materials (BOM)
42 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX40200AUK ~ | PIMORONI-PGA2035-PM722 | U1 |
| 1 | CONN_01X02 RJ45 | RJ45_Amphenol_54602-x08_Horizontal | J1 |
| 5 | CONN_01X02 Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2, J4, J5, J6, J8 |
| 1 | CONN_ARM_JTAG_SWD_10 Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 21 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J9, J10, J11, J12, J13, J14, J15, J16 +13 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4085 | J30 |
| 1 | Conn_ARM_JTAG_SWD_10 | Cortex-M-Debug10 | J31 |
| 2 | SW_SPST | SW_Push_1P1T_NO_CK_KMR2 | SW1, SW2 |
| 2 | BAV19W SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1, D2 |
| 1 | 1k | R_0603_1608Metric | R1 |
| 1 | 180K 1k | R_0603_1608Metric | R2 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R3, R4 |
| 1 | 5.1K 27 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 2.2 27 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
Jolt2-pim left design files
The KiCad project lives in the tangybbq/keyboard repository on GitHub; these links point at the commit this page was built from.
Jolt2-pim left: common questions
How big is the Jolt2-pim left PCB?
The Jolt2-pim left measures 151 × 98 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jolt2-pim left?
42 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Jolt2-pim left design files?
From the tangybbq/keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Jolt2-pim left design in my own project?
The repository has no license, so all rights stay with tangybbq. Use it as a reference, and ask the author before reusing the design.
More boards in keyboard
RP2040/RP2350Jolt2-left
151 × 98 mm65 parts2LNo license21
Mesa2
214 × 111 mm47 parts2LNo license21
Mesa2x
214 × 111 mm47 parts2LNo license21
Nordic nRFBletest-2
78.5 × 52 mm45 parts2LNo license21
Proto4-left
133 × 94 mm37 parts2LNo license21
Mesa1-left
133 × 94 mm37 parts2LNo license21
RP2040/RP2350J3-mez-2040
38 × 38 mm36 parts4LNo license21
RP2040/RP2350Jolty-2040
151 × 98 mm34 parts4LNo license21
Mesa3-left
124 × 111 mm32 parts2LNo license21
Mesa1-right
133 × 94 mm31 parts2LNo license21
AVR/ArduinoShield kb1
65.5 × 53 mm18 parts2LNo license21
Similar boards
Lily58 Pro
kata0510
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Lite Rev3 TOP Case
142.5 × 106.4 mm34 parts2LMIT2.3k
Lily58 Pro BOTTOM
142.5 × 106.3 mm5 parts2LMIT2.3k
Lily58
142.5 × 106.3 mm83 parts2LMIT2.3k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k