12 open source boards using the MAX40200AUK
Real designs built with the MAX40200AUK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Jolt2-left
tangybbq
151 × 98 mm65 parts2LNo license21
Microchip SAMProject-Mach-1
ImperialSpaceSociety
30.5 × 82.6 mm82 parts4LNo license12
FPGAIceduino
RubenVoell
80 × 100 mm241 parts4LCERN-OHL-1.23
Gps rtk tracker
Amazon-Master
125 × 72 mm40 parts2LMIT1
RP2040/RP2350ESP-HI-PLUS
dyu134
58 × 35 mm83 parts4LNo license0
RP2040/RP2350Robot
70.1 × 100 mm78 parts2LNo license0
RP2040/RP2350ESP-HI-PLUS Desktop Sub module
60 × 43 mm61 parts2LNo license0
Nordic nRFBletest-2
78.5 × 52 mm45 parts2LNo license21- schematic only · 124 partsRP2040/RP2350
Keyboard
124 parts2LNo license0 
Jolt2-pim left
151 × 98 mm42 parts2LNo license21
RP2040/RP2350J3-mez-2040
38 × 38 mm36 parts4LNo license21
RP2040/RP2350Jolty-2040
151 × 98 mm34 parts4LNo license21
The MAX40200AUK in open source designs
The gallery holds 12 open source boards using the MAX40200AUK from 5 GitHub repositories; a typical one measures about 78.5 × 82.6 mm and carries around 63 components.
58% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is Jolt2-left by tangybbq.
Microcontrollers on boards using the MAX40200AUK
What boards using the MAX40200AUK are built for
MAX40200AUK: common questions
Where can I find a MAX40200AUK reference design?
Each of the 12 boards on this page is a real design using the MAX40200AUK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MAX40200AUK use?
Most are built on RP2040/RP2350 (7), FPGA (1), Nordic nRF (1) and Microchip SAM (1).
How big is a typical board using the MAX40200AUK?
The median is 78.5 × 82.6 mm, and 58% are two-layer designs.
What is the most popular open source board using the MAX40200AUK?
By GitHub stars, Jolt2-left by tangybbq, with 21 stars.
Can I simulate one of these boards using the MAX40200AUK before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.