Mmdvm hs hat
taozhengbo·mmdvm_hs_duplex
About the Mmdvm hs hat
Mmdvm hs hat is an open source STM32 PCB design by taozhengbo, published on GitHub. It is a 2-layer board measuring 59.2 × 47.8 mm, with 106 components from 42 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the ADF7021. By type, the board carries 51 capacitors, 24 resistors, 12 inductors, 8 diodes, 4 connectors and 3 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
duplex ver of mmdvm
This project provides a Raspberry Pi Hat for the MMDVM_HS Hotspot. It was designed for the Raspberry Pi any Version, but should work on any other Pi with the Hat interface.
First revisions of the board have been built successfully!
The PCB is designed in KiCad and the necessary libraries are included. The supplied Gerber files can be used to order PCBs, for example at Elecrow or DirtyPCBs.
Main components on the Mmdvm hs hat
Mmdvm hs hat bill of materials (BOM)
106 components, 42 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADF7021 | QFN-48-1EP_7x7mm_Pitch0.5mm | U1 |
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_Pitch0.5mm | U2 |
| 1 | ADF7021 | _ADF7021_QFN-48-1EP_7x7mm_Pitch0.5mm | U3 |
| 1 | TCXO | Oscillator_SMD_TXC_7C-4pin_5.0x3.2mm | X1 |
| 1 | 8MHz | Crystal_SMD_Abracon_ABM3-2pin_5.0x3.2mm | Y1 |
| 1 | Conn_01x04 | Pin_Header_Straight_1x04_Pitch2.54mm | J3 |
| 1 | STLINK | Pin_Header_Straight_1x04_Pitch2.54mm | P1 |
| 1 | DISPLAY | Pin_Header_Straight_1x04_Pitch2.54mm | P2 |
| 1 | SMA | SMA_THT_Jack_Straight | P3 |
| 1 | Antenna_Shield | SMA_THT_Jack_Straight | AE2 |
| 1 | RPI-ZERO | z_RPi_Hat_PTH_2 | PI2 |
| 3 | red | LED_0603 | D1, D4, D8 |
| 2 | green | LED_0603 | D2, D6 |
| 2 | yellow | LED_0603 | D3, D5 |
| 1 | amber | LED_0603 | D7 |
| 2 | 22n | L_0603 | L1, L7 |
| 2 | 20n | L_0603 | L2, L8 |
| 2 | 13n | L_0603 | L3, L9 |
| 2 | 27n | L_0603 | L4, L10 |
| 2 | 10u | L_0603 | L5, L6 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 18n | L_0603 | L11, L12 |
| 4 | 6p8 | C_0603 | C1, C6, C35, C40 |
| 11 | 10n | C_0603 | C2, C7, C9, C17, C19, C22, C36, C41 +3 |
| 2 | 220p | C_0603 | C3, C37 |
| 2 | 10p | C_0603 | C4, C38 |
| 2 | 4p7 | C_0603 | C5, C39 |
| 14 | 100n | C_0603 | C8, C10, C15, C16, C20, C24, C25, C26 +6 |
| 2 | 22n | C_0603 | C11, C45 |
| 2 | 470p | C_0603 | C12, C46 |
| 2 | 15n | C_0603 | C13, C47 |
| 2 | 1n | C_0603 | C14, C48 |
| 2 | 22p | C_0603 | C18, C33 |
| 2 | 20p | C_0603 | C21, C23 |
| 2 | 10u/10V | CP_Tantalum_Case-A_EIA-3216-18_Reflow | C28, C31 |
| 2 | 10u | C_0603 | C29, C32 |
| 2 | 10k | R_0603 | R1, R7 |
| 2 | 1k1 | R_0603 | R2, R8 |
| 2 | 3k8 | R_0603 | R3, R19 |
| 2 | 3r9 | R_0603 | R4, R20 |
| 2 | 560 | R_0603 | R5, R21 |
| 2 | 270 | R_0603 | R6, R22 |
| 12 | 1k | R_0603 | R9, R10, R11, R12, R13, R14, R15, R16 +4 |
Mmdvm hs hat design files
The KiCad project lives in the taozhengbo/mmdvm_hs_duplex repository on GitHub; these links point at the commit this page was built from.
- Layoutmmdvm_hs-hat.kicad_pcb
Mmdvm hs hat: common questions
What microcontroller does the Mmdvm hs hat use?
The Mmdvm hs hat is built around the STM32F103C8T6, from the STM32 family.
How big is the Mmdvm hs hat?
The Mmdvm hs hat measures 59.2 × 47.8 mm, has 2 copper layers and is 1.2 mm thick.
How many components are on the Mmdvm hs hat?
106 components, from 42 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mmdvm hs hat design files?
From the taozhengbo/mmdvm_hs_duplex repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Mmdvm hs hat design in my own project?
The repository has no license, so all rights stay with taozhengbo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mmdvm hs hat without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in mmdvm_hs_duplex
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k