Carpet
Taran-the-Idiot·carpet·PCB/PCB.kicad_pcb
About the Carpet PCB
Carpet is an open source PCB design by Taran-the-Idiot, published on GitHub. It is a 2-layer board measuring 62 × 67 mm, with 16 components from 6 distinct parts.
Other key parts include the L293D. By type, the board carries 6 switches, 6 diodes, 2 modules and 1 IC.
It belongs with the keyboards and dev boards & breakouts designs in this gallery.
From the project
A Macropad, that drives like a car?????
What if you had a macropad, that drives????
This is your average macropad by day but with the push of a button it turns into a toy car you can drive around on your desk. It has 4 cherry MX switches and 2 EC11 rotary encoders. For the drive motors it uses 2 N20 motors
It runs off a custom made RP2040 dev board and uses kmk firmware.
This board runs on a custom devboard that was built for this use case that required smaller packaging.

Main components on the Carpet
Carpet bill of materials (BOM)
16 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L293D | DIP-16_W7.62mm | U1 |
| 2 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | M1, M2 |
| 1 | ~ | Taranium_Pico | Pico1 |
| 2 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1, SW2 |
| 4 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW3, SW4, SW5, SW6 |
| 6 | D_Small | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6 |
Carpet design files
The KiCad project lives in the Taran-the-Idiot/carpet repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/PCB.kicad_pcb
- SchematicPCB/PCB.kicad_sch
- BOMPCB/production/bom.csv
Carpet: common questions
How big is the Carpet PCB?
The Carpet measures 62 × 67 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Carpet?
16 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Carpet design files?
From the Taran-the-Idiot/carpet repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Carpet design in my own project?
The repository has no license, so all rights stay with Taran-the-Idiot. Use it as a reference, and ask the author before reusing the design.