STM32-Sensor-Interface-Board
Taukeer1256·STM32-Sensor-Interface-Board
About the STM32-Sensor-Interface-Board
STM32-Sensor-Interface-Board is an open source STM32 PCB design by Taukeer1256, published on GitHub. It is a 2-layer board measuring 17.2 × 32.4 mm, with 5 components from 4 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the AMS1117-3.3 and SN65HVD230. By type, the board carries 3 ICs and 2 capacitors.
It belongs with the sensors and test & measurement designs in this gallery.
From the project
Schematic-level hardware design for an automotive-telematics sensor node — built as a portfolio project targeting hardware design (schematic capture, power/clock/reset design, CAN bus integration, PCB bring-up prep).
Schematic-level hardware design for an automotive-telematics sensor node — built as a portfolio project targeting hardware design (schematic capture, power/clock/reset design, CAN bus integration, PCB bring-up prep).
A STM32F103C8Tx-based board with regulated power, CAN bus connectivity, a UART peripheral header, and an SWD programming interface. Designed in KiCad, schematic-first with PCB placement in progress.
Main components on the STM32-Sensor-Interface-Board
STM32-Sensor-Interface-Board bill of materials (BOM)
5 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 2 | 10UF | SOT-223-3_TabPin2 | C1, C2 |
STM32-Sensor-Interface-Board design files
The KiCad project lives in the Taukeer1256/STM32-Sensor-Interface-Board repository on GitHub; these links point at the commit this page was built from.
- Layoutnew.kicad_pcb
- Schematicnew.kicad_sch
STM32-Sensor-Interface-Board: common questions
What microcontroller does the STM32-Sensor-Interface-Board use?
The STM32-Sensor-Interface-Board is built around the STM32F103C8Tx, from the STM32 family.
How big is the STM32-Sensor-Interface-Board?
The STM32-Sensor-Interface-Board measures 17.2 × 32.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32-Sensor-Interface-Board?
5 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32-Sensor-Interface-Board design files?
From the Taukeer1256/STM32-Sensor-Interface-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM32-Sensor-Interface-Board design in my own project?
The repository has no license, so all rights stay with Taukeer1256. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32-Sensor-Interface-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k