Fetrhjyt
tdety7·fetrhjyt
About the Fetrhjyt PCB
Fetrhjyt is an open source AVR/Arduino PCB design by tdety7, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 40 × 54 mm, with 34 components from 22 distinct parts.
Its main chip is the AT90USB1286-AUR, from the AVR/Arduino family. Other key parts include the USBLC6-2SC6 and LM2776DBVT. By type, the board carries 13 resistors, 12 capacitors, 3 ICs, 2 transistors, 2 connectors and 1 crystal.
From the project
This repository contains the schematic and layout files for the Microsoft Sculpt Wired Conversion Mod.
This repository contains the schematic and layout files for the Microsoft Sculpt Wired Conversion Mod.
To get the board manufactured: 1) Install Kicad & the PCBWay plugin. Use the plugin to start an order, select HASL lead-free if you want lead-free. The other defaults should be fine. Check the box for Assembly service 2) Upload the BOM (bill of materials) and component placement file. These are generated from Kicad: use Tools > "Generate BOM" from the Schematic Editor, and File > "Fabrication Outputs" > "Component placement (.pos)" from the PCB Editor.
Main components on the Fetrhjyt
Fetrhjyt bill of materials (BOM)
34 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U1 |
| 1 | LM2776DBVT Texas Instruments | SOT-23-6 | U2 |
| 1 | AT90USB1286-AUR Microchip Technology | TQFP-64_14x14mm_P0.8mm | U3 |
| 1 | BSS84AK,215 Nexperia USA Inc. | SOT-23 | Q1 |
| 1 | 2N7002BK,215 Nexperia USA Inc. | SOT-23 | Q2 |
| 1 | TSX-3225 16.0000MF18X-AC0 EPSON | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 12401610E4#2A USB_C_Receptacle Amphenol ICC (FCI) | USB_C_Receptacle_Amphenol_12401610E4-2A | J1 |
| 1 | FFC3B07-30-T GCT | TE_3-84952-0_1x30-1MP_P1.0mm_Horizontal | J2 |
| 1 | EVQ-P7A01P TE Connectivity ALCOSWITCH Switches | SW_SPST_EVQP7A | SW1 |
| 1 | CL21A475KOFNNNE Samsung Electro-Mechanics | C_0805_2012Metric | C1 |
| 1 | CL21B104KACNNNC Samsung Electro-Mechanics | C_0805_2012Metric | C2 |
| 1 | CL21B103KBANNNC Samsung Electro-Mechanics | C_0805_2012Metric | C3 |
| 4 | CL10A105KA8NNNC Samsung Electro-Mechanics | C_0603_1608Metric | C4, C5, C6, C9 |
| 2 | CL10C160JB8NNNC AVX Corporation | C_0603_1608Metric | C7, C8 |
| 3 | CL10B104KB8NNNC Samsung Electro-Mechanics | C_0603_1608Metric | C10, C11, C12 |
| 3 | ERJ-PA3F22R0V Panasonic Electronic Components | R_0603_1608Metric | R1, R2, R7 |
| 2 | ERJ-PA3J472V Panasonic Electronic Components | R_0603_1608Metric | R3, R8 |
| 1 | ERJ-3EKF8873V Panasonic Electronic Components | R_0603_1608Metric | R4 |
| 1 | ERJ-PA3J473V Panasonic Electronic Components | R_0603_1608Metric | R5 |
| 2 | ERJ-3GEYJ331V Panasonic Electronic Components | R_0603_1608Metric | R6, R10 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ERJ-PA3J151V | R_0603_1608Metric | R11, R12 |
| 2 | ERJ-3EKF5101V | R_0603_1608Metric | R13, R14 |
Fetrhjyt design files
The KiCad project lives in the tdety7/fetrhjyt repository on GitHub; these links point at the commit this page was built from.
Fetrhjyt: common questions
What microcontroller does the Fetrhjyt use?
The Fetrhjyt is built around the AT90USB1286-AUR, from the AVR/Arduino family.
How big is the Fetrhjyt PCB?
The Fetrhjyt measures 40 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fetrhjyt?
34 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fetrhjyt design files?
From the tdety7/fetrhjyt repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Fetrhjyt design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which tdety7 chose for the repository.
Can I test firmware for the Fetrhjyt without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k