Catduino
About the Catduino PCB
Catduino is an open source AVR/Arduino PCB design by TeamMeanMachine, published on GitHub under the Unlicense license. It is a 2-layer board measuring 45.7 × 38.1 mm, with 13 components from 11 distinct parts.
Its main chip is the ATMEGA32U4, from the AVR/Arduino family. Other key parts include the MIC5219-3.3YM5. By type, the board carries 3 connectors, 3 capacitors, 3 resistors, 2 ICs, 1 crystal and 1 fuse.
From the project
They also frequently require the library files contained in the Core folder of this repository
Main components on the Catduino
Catduino bill of materials (BOM)
13 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA32U4 | TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | MIC5219-3.3YM5 | SOT-23-5 | U2 |
| 1 | RESONATOR-16MHZSMD_3.2X1.3 | RESONATOR-SMD-3.2X1.3 | Y1 |
| 1 | USB_OTG | USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | QWIIC_CONNECTORJS-1MM | 1X04_1MM_RA | J3 |
| 1 | Conn_01x03 | SC-59 | J4 |
| 1 | PPTC_HALF-AMP | Fuse_1206_3216Metric | F1 |
| 2 | 1.0UF-0603-16V-10% | C_0603_1608Metric | C1, C3 |
| 1 | 0.1UF-0603-25V-5% | 0603 | C2 |
| 2 | 220KOHM-0603-1_10W-1% | R_0603_1608Metric | R1, R2 |
| 1 | 10KOHM-0603-1_10W-1% | 0603 | R3 |
Catduino design files
The KiCad project lives in the TeamMeanMachine/Electronics repository on GitHub; these links point at the commit this page was built from.
Catduino: common questions
What microcontroller does the Catduino use?
The Catduino is built around the ATMEGA32U4, from the AVR/Arduino family.
How big is the Catduino PCB?
The Catduino measures 45.7 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Catduino?
13 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Catduino design files?
From the TeamMeanMachine/Electronics repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Catduino design in my own project?
Yes, under the terms of its Unlicense license, which TeamMeanMachine chose for the repository.
Can I test firmware for the Catduino without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Electronics
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k