Acorn-Joystick-Adapter
tebl·Acorn-Joystick-Adapter
About the Acorn-Joystick-Adapter PCB
Acorn-Joystick-Adapter is an open source PCB design by tebl, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 68 × 52.1 mm, with 32 components from 7 distinct parts.
By type, the board carries 22 resistors, 6 transistors and 4 connectors.
It belongs with the retro computing designs in this gallery.
From the project
Joystick adapter that allows you to use common Atari-style joysticks (C64/Amiga/Atari) on your BBC Micro computer!
I've been spending a lot of time restoring an old Acorn BBC Micro Model B, which mostly means fixing it up just enough to allow me to play all the entirely "unique" hits I've missed like Repton and Snapper. As much fun as those games are, I grew up with a Commodore 64 so using the keyboard for everything seemed slightly more manual that I'd like so the next step was figuring out how to get and maintain a Joystick setup for the system.
Acorn-Joystick-Adapter bill of materials (BOM)
32 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | BC337 | TO-92_Inline_Wide | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | Acorn Computer | DSUB-15_Male_Vertical_Pitch2.77x2.84mm | J1 |
| 1 | Atari #1 | DSUB-9_Male_Vertical_Pitch2.77x2.84mm | J2 |
| 1 | Atari #2 | DSUB-9_Male_Vertical_Pitch2.77x2.84mm | J3 |
| 1 | Analog | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 10 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R5, R8, R10, R12, R14, R16 +2 |
| 12 | 20k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4, R6, R7, R9, R11, R13, R15 +4 |
Acorn-Joystick-Adapter design files
The KiCad project lives in the tebl/Acorn-Joystick-Adapter repository on GitHub; these links point at the commit this page was built from.
Acorn-Joystick-Adapter: common questions
How big is the Acorn-Joystick-Adapter PCB?
The Acorn-Joystick-Adapter measures 68 × 52.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Acorn-Joystick-Adapter?
32 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Acorn-Joystick-Adapter design files?
From the tebl/Acorn-Joystick-Adapter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Acorn-Joystick-Adapter design in my own project?
Yes, under the terms of its GPL-3.0 license, which tebl chose for the repository.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k