PikaPC IDE
About the PikaPC IDE PCB
PikaPC IDE is an open source PCB design by techav-homebrew, published on GitHub. It is a 2-layer board measuring 101.6 × 101.6 mm, with 36 components from 15 distinct parts.
Other key parts include the 74FCT2245, 74AHCT573, 74LS139, ATF22V10C and 74F521. By type, the board carries 13 resistors, 8 capacitors, 7 ICs and 6 connectors.
From the project
PowerPC 403GA Homebrew Computer
Main components on the PikaPC IDE
PikaPC IDE bill of materials (BOM)
36 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74FCT2245 | SOIC-20W_7.5x12.8mm_P1.27mm | U1, U2 |
| 1 | 74AHCT573 | TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | 74LS139 | DIP-16_W7.62mm_Socket | U4 |
| 1 | ATF22V10C | DIP-24_W7.62mm_Socket | U5 |
| 1 | 74F521 | SOIC-20W_7.5x12.8mm_P1.27mm | U6 |
| 1 | 74LS07 | DIP-14_W7.62mm_Socket | U7 |
| 1 | DIN41612_03x32_C_Split | DIN41612_C_3x32_Male_Horizontal_THT | J1 |
| 1 | Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Vertical | J2 |
| 2 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J3, J4 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 2 | Conn_02x20_Odd_Even | IDC-Header_2x20_P2.54mm_Vertical | IDE1, IDE2 |
| 7 | 100nF | C_0805_2012Metric | C1, C2, C3, C4, C5, C7, C8 |
| 1 | 10uF | CP_Elec_4x5.7 | C6 |
| 13 | 4k7 | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +5 |
PikaPC IDE design files
The KiCad project lives in the techav-homebrew/PikaPC repository on GitHub; these links point at the commit this page was built from.
PikaPC IDE: common questions
How big is the PikaPC IDE PCB?
The PikaPC IDE measures 101.6 × 101.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PikaPC IDE?
36 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the PikaPC IDE design files?
From the techav-homebrew/PikaPC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PikaPC IDE design in my own project?
The repository has no license, so all rights stay with techav-homebrew. Use it as a reference, and ask the author before reusing the design.
More boards in PikaPC
PikaPC ViRGE Card
101.6 × 101.6 mm148 parts4LNo license3
PikaPC Host
101.6 × 101.6 mm122 parts4LNo license3
PikaPC Mainboard
190.5 × 147.3 mm71 parts2LNo license3
PikaPC SIMM72
101.6 × 101.6 mm58 parts2LNo license3
PikaPC SRAM
101.6 × 101.6 mm44 parts2LNo license3
PikaPC KBC
101.6 × 101.6 mm41 parts2LNo license3
PikaPC Power
101.6 × 101.6 mm14 parts2LNo license3
PikaPC MiniBus
101.1 × 101.1 mm5 parts2LNo license3