120 open source boards using the 74LS139

Real designs built with the 74LS139, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

120 boardsClear filters|Most starred

How designs wire the 74LS139

Read from the KiCad layouts of 83 open source designs, one per repository: what each pin of the 74LS139 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 52 of 83 designs, most often 100 nF (then 10 nF).
GNDpin 8Connected to: GND 96%
VCCpin 16Connected to: 5V 94%
  • Decoupling capacitor on 63% · 100 nF (56), 10 nF (2), 1 µF (1)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Snark barker by schlae, Commodore Plus 4 by baldengineer, Raemixx500 by SukkoPera and 512k by homebrew8088.

The 74LS139 in open source designs

The gallery holds 120 open source boards using the 74LS139 from 88 GitHub repositories; a typical one measures about 130.9 × 100 mm and carries around 53 components.

77% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is Snark barker by schlae.

Microcontrollers on boards using the 74LS139

74LS139: common questions

Where can I find a 74LS139 reference design?

Each of the 120 boards on this page is a real design using the 74LS139. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LS139 VCC pin?

The VCC pin has a decoupling capacitor on 52 of 83 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 83 open source designs using the 74LS139.

What parts are used alongside the 74LS139?

The 74LS245, 74LS04, 74LS32, 74LS08 and 74LS00 appear in the most repositories here.

Which microcontrollers do boards using the 74LS139 use?

Most are built on PIC (5) and AVR/Arduino (5).

How big is a typical board using the 74LS139?

The median is 130.9 × 100 mm, and 77% are two-layer designs.

What is the most popular open source board using the 74LS139?

By GitHub stars, Snark barker by schlae, with 687 stars.

Can I simulate one of these boards using the 74LS139 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part