STDC14-to-TC2030-IDC
TechnikWeber·STDC14-to-TC2030-IDC
About the STDC14-to-TC2030-IDC PCB
STDC14-to-TC2030-IDC is an open source PCB design by TechnikWeber, published on GitHub under the MIT license. It is a 2-layer board measuring 19.5 × 17 mm, with 2 components from 2 distinct parts.
It belongs with the usb & debug tools designs in this gallery.
From the project
Adapter PCB from the STDC14 debug connector (STLINK-V3) to a Tag-Connect TC2030-IDC cable (KiCad).
A tiny adapter PCB from the 14-pin STDC14 debug connector (1.27 mm, used by the STLINK-V3MINIE and other STLINK-V3 probes) to a 2×3 2.54 mm IDC header for a Tag-Connect TC2030-IDC (or TC2030-SKEDD) cable — so you can program and debug STM32 boards over SWD with a Tag-Connect footprint instead of a connector.
- STDC14AdaptertoJTAGTC2030SKEDD.kicadsch / .kicadpcb — schematic and PCB (KiCad) - production/` — Gerber/drill zip, BOM, positions and netlist, ready to order (made with the KiCad Fabrication Toolkit)

STDC14-to-TC2030-IDC bill of materials (BOM)
2 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 14-pol STDC14 JTAG&SWD 1.27mm | PinHeader_2x07_P1.27mm_Vertical_SMD | J1 |
| 1 | 6-pol TC2030 SWD 2.54mm | IDC-Header_2x03_P2.54mm_Vertical | J3 |
STDC14-to-TC2030-IDC design files
The KiCad project lives in the TechnikWeber/STDC14-to-TC2030-IDC repository on GitHub; these links point at the commit this page was built from.
STDC14-to-TC2030-IDC: common questions
How big is the STDC14-to-TC2030-IDC PCB?
The STDC14-to-TC2030-IDC measures 19.5 × 17 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STDC14-to-TC2030-IDC?
2 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STDC14-to-TC2030-IDC design files?
From the TechnikWeber/STDC14-to-TC2030-IDC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the STDC14-to-TC2030-IDC design in my own project?
Yes, under the terms of its MIT license, which TechnikWeber chose for the repository.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389