CACKLE-Driver-DRV8213 brushed Motor Driver
techy-robot·CACKLE-Driver-DRV8213_brushed_Motor_Driver
About the CACKLE-Driver-DRV8213 brushed Motor Driver PCB
CACKLE-Driver-DRV8213 brushed Motor Driver is an open source PCB design by techy-robot, published on GitHub under the CC-BY-NC-4.0 license. It is a 4-layer board measuring 15 × 15 mm, with 26 components from 13 distinct parts.
Other key parts include the DRV8213RTER and LP2981-3.3. By type, the board carries 11 connectors, 10 capacitors, 3 resistors and 2 ICs.
It belongs with the robotics & motion and test & measurement designs in this gallery.
From the project
This is a single motor driver based on the DRV8213RTER Texas Instruments chip. It is capable of 4 amps current in a voltage range of 1.65 to 11 volts. This is basically a 2-pin H-bridge driver with integrated protection logic. Driving one pin with PWM will cause the motor to go i
This is a single motor driver based on the DRV8213RTER Texas Instruments chip. It is capable of 4 amps current in a voltage range of 1.65 to 11 volts. This is basically a 2-pin H-bridge driver with integrated protection logic. Driving one pin with PWM will cause the motor to go in one direction, driving both pins will cause braking, and disabling both pins will enable coasting.
Main components on the CACKLE-Driver-DRV8213 brushed Motor Driver
CACKLE-Driver-DRV8213 brushed Motor Driver bill of materials (BOM)
26 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8213RTER | WQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm_ThermalVias | U1 |
| 1 | LP2981-3.3 | SOT-23-5 | U2 |
| 4 | Keystone 6102 | Keystone_6102 | J1, J2, J5, J6 |
| 4 | Keystone 6100 | Keystone_6100 | J3, J4, J7, J8 |
| 1 | JST PH 2mm horizontal | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J9 |
| 2 | Precidip 852-10-004-20-001101 | Precidip 852-10-004-20-001101 | J10, J11 |
| 6 | 10uF, 16v | C_0603_1608Metric | C1, C2, C3, C4, C5, C7 |
| 2 | 100nF, 16v | C_0402_1005Metric | C6, C8 |
| 1 | 2.2uF, 10v | C_0402_1005Metric | C9 |
| 1 | 33nF | C_0603_1608Metric | C10 |
| 1 | 10K 10k | R_0402_1005Metric | R1 |
| 1 | 3.3K 3.3k | R_0402_1005Metric | R2 |
| 1 | 10k | R_0402_1005Metric | R3 |
CACKLE-Driver-DRV8213 brushed Motor Driver design files
The KiCad project lives in the techy-robot/CACKLE-Driver-DRV8213_brushed_Motor_Driver repository on GitHub; these links point at the commit this page was built from.
CACKLE-Driver-DRV8213 brushed Motor Driver: common questions
How big is the CACKLE-Driver-DRV8213 brushed Motor Driver PCB?
The CACKLE-Driver-DRV8213 brushed Motor Driver measures 15 × 15 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the CACKLE-Driver-DRV8213 brushed Motor Driver?
26 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CACKLE-Driver-DRV8213 brushed Motor Driver design files?
From the techy-robot/CACKLE-Driver-DRV8213_brushed_Motor_Driver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CACKLE-Driver-DRV8213 brushed Motor Driver design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979