HardLabs

CACKLE-Passive-Vertical Sensor Spacer

techy-robot·CACKLE-Passive-Vertical_Sensor_Spacer

CACKLE-Passive-Vertical Sensor Spacer PCB layout, top view — open source board by techy-robot

About the CACKLE-Passive-Vertical Sensor Spacer PCB

CACKLE-Passive-Vertical Sensor Spacer is an open source PCB design by techy-robot, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 9 × 5.7 mm, with 2 components from 2 distinct parts.

It belongs with the sensors designs in this gallery.

From the project

This is a simple spacer board to extend the height between the main Hub and the expansion boards

CACKLE-Passive-Vertical Sensor Spacer bill of materials (BOM)

2 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TE 3-2363961-0 Connector
J1
1
TE 3-2363962-0 Connector
J15

CACKLE-Passive-Vertical Sensor Spacer design files

The KiCad project lives in the techy-robot/CACKLE-Passive-Vertical_Sensor_Spacer repository on GitHub; these links point at the commit this page was built from.

CACKLE-Passive-Vertical Sensor Spacer: common questions

How big is the CACKLE-Passive-Vertical Sensor Spacer PCB?

The CACKLE-Passive-Vertical Sensor Spacer measures 9 × 5.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CACKLE-Passive-Vertical Sensor Spacer?

2 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CACKLE-Passive-Vertical Sensor Spacer design files?

From the techy-robot/CACKLE-Passive-Vertical_Sensor_Spacer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the CACKLE-Passive-Vertical Sensor Spacer design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Similar boards