Pots
About the Pots PCB
Pots is an open source PCB design by shanteacontrols, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 390 × 93 mm, with 75 components from 5 distinct parts.
Other key parts include the MC14067BDWR2G-SO24W. By type, the board carries 64 resistors, 6 capacitors and 4 ICs.
It belongs with the audio, displays & leds and sensors designs in this gallery.
From the project
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
OpenDeck is a platform for building interactive control and sensing devices using MIDI and OSC. From USB MIDI DJ controllers and DAW control surfaces to Ethernet-connected OSC nodes, sensor interfaces and media installations, OpenDeck supports a wide range of hardware projects.
Browser-based configuration No firmware development required Hardware-independent - supports multiple MCU families and development boards MIDI and OSC support * Extensible sensor support
Main components on the Pots
Pots bill of materials (BOM)
75 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | MC14067BDWR2G-SO24W | SOIC-24W_7.5x15.4mm_P1.27mm | U1, U2, U3, U4 |
| 1 | C160409 ~ | CONN_SM10B-SRSS-TB_JST | CONN1 |
| 1 | 10U 10u | CP_Elec_4x5.4 | C1 |
| 5 | 100N 100n | C_0402_1005Metric | C2, C3, C4, C5, C6 |
| 64 | 10K 10k | RK09D1130C2P | R1, R2, R3, R4, R5, R6, R7, R8 +56 |
Pots design files
The KiCad project lives in the shanteacontrols/OpenDeck repository on GitHub; these links point at the commit this page was built from.
Pots: common questions
How big is the Pots PCB?
The Pots measures 390 × 93 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pots?
75 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pots design files?
From the shanteacontrols/OpenDeck repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pots design in my own project?
Yes, under the terms of its Apache-2.0 license, which shanteacontrols chose for the repository.
More boards in OpenDeck
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k