Unimoc jacobi
Tecnologic·unimoc_jacobi
About the Unimoc jacobi PCB
Unimoc jacobi is an open source STM32 PCB design by Tecnologic, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 84 × 79 mm, with 229 components from 91 distinct parts.
Its main chip is the 511-STM32F730R8T6, from the STM32 family. Other key parts include the LM5109BMAX/NOPB, 595-INA240A2PWR, LMR12010YMK/NOPB, LM5008MMX/NOPB and LP2985-33DBVR. By type, the board carries 88 resistors, 75 capacitors, 19 connectors, 15 diodes, 13 ICs and 12 transistors.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
36V at 40A unimoc inverter for Hoverboard Motors and such.
The unimoc nodes are named after inventors. Moritz Hermann Jacobi built the first practical electric motor (1834, Königsberg) and drove a boat on the Neva with it (1838): the first electric motor put to practical use as a drive, which is what this board is for.
What the hardware can do and where it stops. The numbers come from the datasheets and rough loss and thermal estimates (calculations below), not from measurements on a test bench. The reference load is the kids' quad: an MY1020 1600 W BLDC on 3 × 12 V lead-acid, which the controller already drives with 80 A peak phase current.
Main components on the Unimoc jacobi
Unimoc jacobi bill of materials (BOM)
229 components, 91 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | LM5109BMAX/NOPB LM5109BMA | SOIC-8_3.9x4.9mm_P1.27mm | U201, U301, U401 |
| 3 | 595-INA240A2PWR INA240A1PWR | TSSOP-8_4.4x3mm_P0.65mm | U202, U302, U402 |
| 1 | LMR12010YMK/NOPB LMR12010Y | SOT-23-6 | U501 |
| 1 | LM5008MMX/NOPB LM5008 | MSOP-8_3x3mm_P0.65mm | U502 |
| 1 | LP2985-33DBVR | SOT-23-5 | U503 |
| 1 | 511-STM32F730R8T6 STM32H743VIT6 | LQFP-100_14x14mm_P0.5mm | U601 |
| 1 | TCAN334DCNR TCAN334 | SOT-23-8 | U1101 |
| 1 | AT34C04-SS5M-B TLP291 | SOIC-4_4.55x2.6mm_P1.27mm | U1102 |
| 1 | AP2204K-5.0TRG1 AP2204K-5.0 | SOT-23-5 | U1103 |
| 12 | 726-BSC040N08NS5ATMA NCEP6080AG | LFPAK56_ThermalVias-1 | Q201, Q202, Q203, Q204, Q301, Q302, Q303, Q304 +4 |
| 1 | SM4444TEV-20.0M Q33310F70051500 | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X601 |
| 1 | C124391 PWM | PinHeader_2x05_P2.54mm_Vertical_SMD | J101 |
| 1 | C124391 ADC | PinHeader_2x05_P2.54mm_Vertical_SMD | J102 |
| 1 | C261072 PWM | PinSocket_2x05_P2.54mm_Vertical_SMD | J103 |
| 1 | C261072 ADC | PinSocket_2x05_P2.54mm_Vertical_SMD | J104 |
| 1 | + | Terminal_M3_XFCN_TT34086077-0910 | J105 |
| 1 | A | Terminal_M3_XFCN_TT34086077-0910 | J106 |
| 1 | B | Terminal_M3_XFCN_TT34086077-0910 | J107 |
| 1 | C | Terminal_M3_XFCN_TT34086077-0910 | J108 |
| 1 | GND | Terminal_M3_XFCN_TT34086077-0910 | J109 |
Show 71 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | VSENSE | PinSocket_2x05_P2.54mm_Vertical_SMD | J110 |
| 1 | VSENSE | PinHeader_2x05_P2.54mm_Vertical_SMD | J111 |
| 1 | C157929 Enable | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J501 |
| 1 | C157926 AIN | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J601 |
| 1 | C69074 TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J602 |
| 1 | C157929 MOT_TEMP | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J701 |
| 1 | C157923 HALL | JST_PH_S5B-PH-K_1x05_P2.00mm_Horizontal | J1101 |
| 1 | C157926 CAN_IN | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J1103 |
| 1 | C157926 CAN_Out | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J1104 |
| 1 | SWD | PinHeader_2x05_P1.27mm_Vertical | P1101 |
| 1 | BTLDR | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP601 |
| 1 | Housing_Pad | RND-455-00370 | N101 |
| 1 | NCP18XH103F03RB NTC 10k | R_0603_1608Metric | TH101 |
| 5 | SS110R3G | D_SMA | D201, D301, D401, D501, D505 |
| 2 | PMLL4153 | D_MiniMELF | D502, D506 |
| 1 | 598-8070-107F 3V3 | LED_0603_1608Metric | D503 |
| 1 | 598-8070-107F 12V | LED_0603_1608Metric | D504 |
| 1 | BZT52C15 | D_SOD-123 | D507 |
| 1 | 598-8070-107F RUN | LED_0603_1608Metric | D1101 |
| 1 | 598-8070-107F ERROR | LED_0603_1608Metric | D1102 |
| 1 | 598-8070-107F FW | LED_0603_1608Metric | D1103 |
| 1 | 598-8070-107F PWM | LED_0603_1608Metric | D1104 |
| 1 | 1N4148W | D_SOD-123 | D1105 |
| 1 | ACML-0603-2000 Ferrite_Bead_Small | R_0603_1608Metric | FB502 |
| 1 | MIP25204R7MBE 4u7 | L_1206_3216Metric | L501 |
| 1 | SMNR8040-331MT 330u | L_Taiyo-Yuden_NR-80xx_HandSoldering | L502 |
| 4 | 1n | C_0603_1608Metric | C101, C102, C103, C104 |
| 3 | 100n | C_0603_1608Metric | C105, C621, C622 |
| 6 | CC1206ZKY5V8BB106 10u | C_1206_3216Metric | C201, C203, C301, C303, C401, C403 |
| 25 | CL10B104KBNC 100n | C_0603_1608Metric | C202, C205, C302, C305, C402, C405, C502, C503 +17 |
| 3 | FS55X106K101EHG 10u | C_2220_5650Metric | C204, C304, C404 |
| 6 | GYA1J560MCQ1GS 56u | CP_Elec_10x10 | C207, C209, C307, C309, C407, C409 |
| 1 | 10u | C_2220_5650Metric | C501 |
| 4 | CL32B226MOJNNNE 22u | C_1210_3225Metric | C504, C508, C510, C511 |
| 3 | CL10B105KANC 1u | C_0603_1608Metric | C505, C1106, C1107 |
| 1 | GRM1885C1H222JA01D 4n7 | C_0603_1608Metric | C509 |
| 1 | 4n7 | C_0603_1608Metric | C513 |
| 2 | 10u | C_0805_2012Metric | C514, C516 |
| 4 | 10n | C_0603_1608Metric | C515, C719, C1108, C1109 |
| 1 | CL32B106KLJNNNE 2u2 | C_0603_1608Metric | C603 |
| 2 | CL32B106KLJNNNE 10u | C_1210_3225Metric | C606, C607 |
| 1 | 2u2 | C_0603_1608Metric | C620 |
| 2 | VJ0603Y102JXACW1BC 10n | C_0603_1608Metric | C703, C704 |
| 6 | 2n2 | C_0603_1608Metric | C713, C714, C715, C716, C717, C718 |
| 4 | 47k 0.1% | R_0805_2012Metric | R101, R103, R105, R107 |
| 4 | 2k2 0.1% | R_0603_1608Metric | R102, R104, R106, R108 |
| 3 | 10k | R_0603_1608Metric | R109, R612, R1116 |
| 1 | 2k2 | R_0603_1608Metric | R110 |
| 3 | MS122WF200NT4E 0m5 | R_Shunt_Yezhan_DSLR-5_3920_Kelvin | R201, R301, R401 |
| 18 | MCR03ERTJ1R1 1R1 | R_0603_1608Metric | R203, R205, R207, R209, R303, R305, R307, R309 +10 |
| 3 | MS122WF200NT4E 47k | R_0603_1608Metric | R211, R311, R411 |
| 9 | 47k | R_0603_1608Metric | R212, R213, R214, R312, R313, R314, R412, R413 +1 |
| 1 | CR0603JA0224G 220k | R_0603_1608Metric | R501 |
| 1 | CR0603-JW-104ELF 100k | R_0603_1608Metric | R502 |
| 6 | MCR03ERTJ113 11k | R_0603_1608Metric | R503, R505, R601, R602, R603, R605 |
| 1 | ERJ-PA3F3402V 34k | R_0603_1608Metric | R504 |
| 1 | RS-03K272JT 2k7 | R_0603_1608Metric | R506 |
| 8 | MCR03ERTJ511 510R | R_0603_1608Metric | R507, R1102, R1103, R1104, R1106, R1107, R1110, R1111 |
| 1 | MCR03ERTJ11R 100k | R_0603_1608Metric | R508 |
| 1 | MCR03ERTJ11R 47R | R_0805_2012Metric | R509 |
| 1 | MCR03ERTJ11R 10k | R_0603_1608Metric | R510 |
| 1 | MCR03ERTJ11R 22k | R_0603_1608Metric | R511 |
| 1 | MCR03ERTJ911 3k3 | R_0603_1608Metric | R513 |
| 3 | 0603WAJ0472T5E 4k7 | R_0603_1608Metric | R604, R704, R705 |
| 2 | 5k1 | R_0603_1608Metric | R613, R614 |
| 2 | ARG03BTC1002 10k 0.1% | R_0603_1608Metric | R703, R716 |
| 6 | 220R | R_0603_1608Metric | R717, R718, R719, R720, R721, R722 |
| 1 | 4k7 | R_0603_1608Metric | R723 |
| 2 | MCR03ERTJ113 510R | R_0603_1608Metric | R1101, R1105 |
| 3 | MCR03ERTJ11R 11R | R_0603_1608Metric | R1108, R1109, R1114 |
| 1 | MCR03ERTJ113 10k | R_1206_3216Metric | R1115 |
Unimoc jacobi design files
The KiCad project lives in the Tecnologic/unimoc_jacobi repository on GitHub; these links point at the commit this page was built from.
Unimoc jacobi: common questions
What microcontroller does the Unimoc jacobi use?
The Unimoc jacobi is built around the 511-STM32F730R8T6, from the STM32 family.
How big is the Unimoc jacobi PCB?
The Unimoc jacobi measures 84 × 79 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Unimoc jacobi?
229 components, from 91 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Unimoc jacobi design files?
From the Tecnologic/unimoc_jacobi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Unimoc jacobi design in my own project?
Yes, under the terms of its GPL-3.0 license, which Tecnologic chose for the repository.
Can I test firmware for the Unimoc jacobi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k