2 open source boards using the AP2204K-5.0TRG1
Real designs built with the AP2204K-5.0TRG1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAMDSKY driver
benkrasnow
43 × 92.3 mm44 partsMIT258
STM32Module 16S
stuartpittaway
71.1 × 89.6 mm113 parts4LCC-BY-NC-4.01.1k
The AP2204K-5.0TRG1 in open source designs
The gallery holds 2 open source boards using the AP2204K-5.0TRG1 from 2 GitHub repositories; a typical one measures about 57 × 91 mm and carries around 79 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Module 16S by stuartpittaway.
Microcontrollers on boards using the AP2204K-5.0TRG1
What boards using the AP2204K-5.0TRG1 are built for
AP2204K-5.0TRG1: common questions
Where can I find a AP2204K-5.0TRG1 reference design?
Each of the 2 boards on this page is a real design using the AP2204K-5.0TRG1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP2204K-5.0TRG1 use?
Most are built on Microchip SAM (1) and STM32 (1).
How big is a typical board using the AP2204K-5.0TRG1?
The median is 57 × 91 mm, and 0% are two-layer designs.
What is the most popular open source board using the AP2204K-5.0TRG1?
By GitHub stars, Module 16S by stuartpittaway, with 1,136 stars.
Can I simulate one of these boards using the AP2204K-5.0TRG1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.