TeR STeeRDisplay
Tecnun-eRacing·TeR_STeeRDisplay·TeR_STeeRDisplay/TeR_STeeRDisplay.kicad_pcb
About the TeR STeeRDisplay PCB
TeR STeeRDisplay is an open source STM32 PCB design by Tecnun-eRacing, published on GitHub. It is a 4-layer board measuring 67 × 79.4 mm, with 132 components from 42 distinct parts.
Its main chip is the STM32F446RET6, from the STM32 family. Other key parts include the TSR_1-2450, LM1117MP-3.3 and TCAN332. By type, the board carries 40 capacitors, 32 resistors, 9 diodes, 4 ICs, 4 LEDs and 3 transistors.
From the project
Este repositorio contiene los archivos de diseño electrónico y la documentación necesaria para la producción de la placa del volante con pantalla
Este repositorio contiene los archivos de diseño electrónico y la documentación necesaria para la producción de la placa del volante con pantalla
/Hardware (KiCad): Archivos de diseño electrónico completos (esquemático, layout ) de la placa del volante. /Producción (JLCPCB): Guía de compra paso a paso, junto con los archivos necesarios (Gerbers, BOM y CPL) para gestionar la fabricación de la PCB en JLCPCB.
Main components on the TeR STeeRDisplay
TeR STeeRDisplay bill of materials (BOM)
132 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F446RET6 | QFP50P1200X1200X160-64N | IC1 |
| 1 | TSR_1-2450 | Converter_DCDC_TRACO_TSR-1_THT | U1 |
| 1 | LM1117MP-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | TCAN332 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | TEMT6000X01 | TEMT6000X01 | Q1 |
| 2 | ZXMN3F30FH | SOT-23 | Q2, Q4 |
| 1 | C367183 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | BD125-10-A-0305-0580-L-B | BD12510A03050580LB | J1 |
| 1 | FFC2B35-10-T | FFC2B3510T | J2 |
| 1 | BOOT0 | SW_SPST_PTS810 | BOOT1 |
| 26 | CONN_01X01_PIN Conn_01x01_Pin | SolderWirePad_1x01_SMD_1x2mm | BTN1, BTN2, BTN3, BTN4, BTN5, BTN6, IN1, IN3 +18 |
| 1 | 500MA 500mA | Fuse_1210_3225Metric | F1 |
| 1 | ACT45B-510-2P-TL003 | FIL_ACT45B-510-2P-TL003 | FL1 |
| 4 | Conn_01x01_Pin | SolderWirePad_1x01_SMD_1x2mm | G +24 C+ C-, VCC17, VCC18, VCC19 |
| 1 | 120R Term | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | RST | SW_SPST_PTS810 | NRST1 |
| 4 | 158301260A | 158301260A | LED1, LED2, LED3, LED4 |
| 8 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | NUP2105L | SOT-23 | D9 |
| 1 | 120R | L_0805_2012Metric | FB1 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCK-141 | L_TracoPower_TCK-141 | L1 |
| 10 | 100N 100n | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +2 |
| 15 | 100NF 100nF | C_0603_1608Metric | C10, C11, C12, C13, C14, C15, C16, C17 +7 |
| 2 | 18PF 18pF | C_0603_1608Metric | C18, C22 |
| 1 | 10UF 10uF | C_1210_3225Metric | C19 |
| 1 | 0.1UF 0.1uF | C_0603_1608Metric | C20 |
| 1 | 100NF 100nF | C_0402_1005Metric | C24 |
| 1 | 10UF 10uF | C_0402_1005Metric | C26 |
| 1 | 2.2UF 2.2uF | C_0805_2012Metric | C29 |
| 1 | 1UF 1uF | C_0805_2012Metric | C32 |
| 2 | 10 µF | C_0805_2012Metric | C33, C34 |
| 2 | 10U 10u | C_0603_1608Metric | C35, C36 |
| 1 | 4.7NF 4.7nF | C_0603_1608Metric | C38 |
| 2 | 10P 10p | C_0603_1608Metric | C39, C40 |
| 19 | 10K | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +11 |
| 1 | 220R | R_0603_1608Metric | R10 |
| 1 | 300R | R_0603_1608Metric | R14 |
| 3 | 100K 100k | R_0603_1608Metric | R15, R17, R18 |
| 2 | 60R | R_0603_1608Metric | R20, R21 |
| 4 | 18R | R_1210_3225Metric | R29, R30, R31, R32 |
| 1 | 470R | R_0603_1608Metric | R35 |
| 1 | 6R | R_0603_1608Metric | R36 |
TeR STeeRDisplay design files
The KiCad project lives in the Tecnun-eRacing/TeR_STeeRDisplay repository on GitHub; these links point at the commit this page was built from.
TeR STeeRDisplay: common questions
What microcontroller does the TeR STeeRDisplay use?
The TeR STeeRDisplay is built around the STM32F446RET6, from the STM32 family.
How big is the TeR STeeRDisplay PCB?
The TeR STeeRDisplay measures 67 × 79.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the TeR STeeRDisplay?
132 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TeR STeeRDisplay design files?
From the Tecnun-eRacing/TeR_STeeRDisplay repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TeR STeeRDisplay design in my own project?
The repository has no license, so all rights stay with Tecnun-eRacing. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TeR STeeRDisplay without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k