46 open source boards using the TSR_1-2450

Real designs built with the TSR_1-2450, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

46 boardsClear filters|Most starred

How designs wire the TSR_1-2450

Read from the KiCad layouts of 34 open source designs, one per repository: what each pin of the TSR_1-2450 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 2Connected to: GND 94%
VOUTpin 3Connected to: 5V 85%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mhi ac ctrl esp32 by hberntsen, Argo v9-stable rev4 by SensorsINI, UMMF by nils-eilers and MainBoard by AresEnsea.

The TSR_1-2450 in open source designs

The gallery holds 46 open source boards using the TSR_1-2450 from 35 GitHub repositories; a typical one measures about 86.5 × 78 mm and carries around 48 components.

80% are two-layer designs, the rest use four layers or more, and 26% carry an open source license.

The most starred is Mhi ac ctrl esp32 by hberntsen.

Microcontrollers on boards using the TSR_1-2450

TSR_1-2450: common questions

Where can I find a TSR_1-2450 reference design?

Each of the 46 boards on this page is a real design using the TSR_1-2450. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TSR_1-2450?

The PC817, AMS1117-3.3, ESP32-DEVKIT-V1, LD1117S33TR_SOT223 and NUCLEO-F446RE appear in the most repositories here.

Which microcontrollers do boards using the TSR_1-2450 use?

Most are built on ESP32 (11), STM32 (5), NXP (4) and AVR/Arduino (2).

How big is a typical board using the TSR_1-2450?

The median is 86.5 × 78 mm, and 80% are two-layer designs.

What is the most popular open source board using the TSR_1-2450?

By GitHub stars, Mhi ac ctrl esp32 by hberntsen, with 71 stars.

Can I simulate one of these boards using the TSR_1-2450 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part