GroupProjectCustom
TeFka·PeatMonitoringProject·Hardware/STM32_board/GroupProjectCustom.kicad_pcb
About the GroupProjectCustom PCB
GroupProjectCustom is an open source STM32 PCB design by TeFka, published on GitHub. It is a 2-layer board measuring 72 × 64.6 mm, with 69 components from 30 distinct parts.
Its main chip is the STM32L412RBT6P, from the STM32 family. Other key parts include the AZ1117-3.3 and TMP126EDBVRQ1. By type, the board carries 20 resistors, 16 capacitors, 5 transistors, 4 diodes, 3 ICs and 2 connectors.
From the project
This is the repository for used for storage of all software code and other components produced during the project of developing the peat monitoring device or University of Nottingham EEEE4019 Group Project.
Main components on the GroupProjectCustom
GroupProjectCustom bill of materials (BOM)
69 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AZ1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32L412RBT6P | STM32L412RBT6P_Foot | U2 |
| 1 | TMP126EDBVRQ1 | SOT-23-6_Handsoldering | U3 |
| 5 | 2N7002K | SOT-23 | Q1, Q2, Q3, Q4, Q5 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Conn_02x07_Odd_Even | PinHeader_2x07_P1.27mm_Vertical_SMD | J2 |
| 3 | Conn_01x03_Female | PinHeader_1x03_P2.54mm_Vertical | ADC1, ADC2, ADC3 |
| 1 | SW_SPDT | PinHeader_1x03_P2.54mm_Vertical | BOOT1 |
| 3 | SW_Push | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | BTN1, BTN2, RST1 |
| 1 | Crystal | Crystal_HC49-4H_Vertical | HSE1 |
| 4 | Conn_01x04_Female | PinHeader_1x04_P2.54mm_Vertical | I2C1, I2C2, I2C3, I2C4 |
| 1 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 2 | Conn_01x05_Female | PinHeader_1x05_P2.54mm_Vertical | LPUART1, USART1 |
| 1 | Crystal | Crystal_SMD_MicroCrystal_CC7V-T1A-2Pin_3.2x1.5mm_HandSoldering | LSE1 |
| 1 | Conn_01x02_Female | PinHeader_1x02_P2.54mm_Vertical | PWR1 |
| 1 | Conn_01x06_Female | PinHeader_1x06_P2.54mm_Vertical | SPI1 |
| 4 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4 |
| 1 | FerriteBead_Small | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | FB1 |
| 7 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C5, C13, C14, C15, C16 |
| 4 | 10p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C11, C12 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 2 | 20p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 1 | 100 | R_0603_1608Metric | R1 |
| 2 | 100k | R_0603_1608Metric | R2, R3 |
| 7 | 1k | R_0603_1608Metric | R4, R5, R11, R13, R14, R16, R18 |
| 4 | 330 | R_0603_1608Metric | R6, R7, R8, R9 |
| 1 | 390 | R_0603_1608Metric | R10 |
| 5 | 10k | R_0603_1608Metric | R12, R15, R17, R19, R20 |
GroupProjectCustom design files
The KiCad project lives in the TeFka/PeatMonitoringProject repository on GitHub; these links point at the commit this page was built from.
GroupProjectCustom: common questions
What microcontroller does the GroupProjectCustom use?
The GroupProjectCustom is built around the STM32L412RBT6P, from the STM32 family.
How big is the GroupProjectCustom PCB?
The GroupProjectCustom measures 72 × 64.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GroupProjectCustom?
69 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the GroupProjectCustom design files?
From the TeFka/PeatMonitoringProject repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the GroupProjectCustom design in my own project?
The repository has no license, so all rights stay with TeFka. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the GroupProjectCustom without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in PeatMonitoringProject
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k