Battery backup circuit
TeFka·PeatMonitoringProject·Hardware/BatteryControl/battery.kicad_pcb
About the Battery backup circuit PCB
Battery backup circuit is an open source PCB design by TeFka, published on GitHub. It is a 2-layer board measuring 40 × 15 mm, with 11 components from 8 distinct parts.
Other key parts include the 74AHC1G04 and LM1117-3.3. By type, the board carries 5 resistors, 2 ICs, 2 transistors and 2 diodes.
It belongs with the power & battery designs in this gallery.
From the project
This is the repository for used for storage of all software code and other components produced during the project of developing the peat monitoring device or University of Nottingham EEEE4019 Group Project.
Main components on the Battery backup circuit
Battery backup circuit bill of materials (BOM)
11 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74AHC1G04 | SOT65P210X110-5N | U1 |
| 1 | LM1117-3.3 | VREG_LM1117MP-3.3_NOPB | U2 |
| 2 | IRLML6402 | SOT-23 | Q1, Q2 |
| 1 | 1N4148WS | D_SOD-323 | D1 |
| 1 | RED | 0603_DIODE | D2 |
| 1 | 825 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 3 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R5 |
| 1 | 200 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
Battery backup circuit design files
The KiCad project lives in the TeFka/PeatMonitoringProject repository on GitHub; these links point at the commit this page was built from.
Battery backup circuit: common questions
How big is the Battery backup circuit PCB?
The Battery backup circuit measures 40 × 15 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Battery backup circuit?
11 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Battery backup circuit design files?
From the TeFka/PeatMonitoringProject repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Battery backup circuit design in my own project?
The repository has no license, so all rights stay with TeFka. Use it as a reference, and ask the author before reusing the design.
More boards in PeatMonitoringProject
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k