LPS28Report
TeFka·PeatMonitoringProject·Hardware/PressureSensor/LPS28Report.kicad_pcb
About the LPS28Report PCB
LPS28Report is an open source PCB design by TeFka, published on GitHub. It is a 2-layer board measuring 20 × 20 mm, with 5 components from 4 distinct parts.
By type, the board carries 1 connector and 1 capacitor.
From the project
This is the repository for used for storage of all software code and other components produced during the project of developing the peat monitoring device or University of Nottingham EEEE4019 Group Project.
LPS28Report bill of materials (BOM)
5 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x05_Male | PinHeader_1x05_P1.00mm_Vertical_SMD_Pin1Left | J1 |
| 1 | LPS28DFWTR | LPS28DFWTR | PressureS1 |
| 2 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | SAO_GND1, SAO_Vdd1 |
| 1 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
LPS28Report design files
The KiCad project lives in the TeFka/PeatMonitoringProject repository on GitHub; these links point at the commit this page was built from.
LPS28Report: common questions
How big is the LPS28Report PCB?
The LPS28Report measures 20 × 20 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LPS28Report?
5 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the LPS28Report design files?
From the TeFka/PeatMonitoringProject repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LPS28Report design in my own project?
The repository has no license, so all rights stay with TeFka. Use it as a reference, and ask the author before reusing the design.