STM32newpowerbackup
TeganJohnson·Tic-Tac-ToeClawMachine·changes/STM32newpowerbackup.kicad_pcb
About the STM32newpowerbackup PCB
STM32newpowerbackup is an open source STM32 PCB design by TeganJohnson, published on GitHub. It is a 2-layer board measuring 177.8 × 101.6 mm, with 44 components from 30 distinct parts.
Its main chip is the STM32F091RCTx, from the STM32 family. Other key parts include the MP2338GTL-Z and LM317_SOT-223. By type, the board carries 18 capacitors, 10 resistors, 4 connectors, 3 ICs, 2 inductors and 1 switch.
Main components on the STM32newpowerbackup
STM32newpowerbackup bill of materials (BOM)
44 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP2338GTL-Z | SOT583_MP2338_MNP | U1 |
| 1 | LM317_SOT-223 | SOT-223-3_TabPin2 | U2 |
| 1 | STM32F091RCTx | LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | Digital/PWM | PinSocket_1x10_P2.54mm_Vertical | J1 |
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | Analog | PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 3 | Conn_02x06_Odd_Even | IDC-Header_2x06_P2.54mm_Latch6.5mm_Vertical | Board1, Board2, Board3 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | Display(ILI9341TFT)1 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | Joystick1 |
| 1 | Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | STLink1 |
| 1 | SW_Push | SW_SPST_TL3342 | SW1 |
| 1 | 600Ohm @ 100MHz | R_0603_1608Metric | FB1 |
| 1 | 6.8uH | L_0805_2012Metric | L1 |
| 4 | 22nF | C_0805_2012Metric | C1, C4, C5, C7 |
| 3 | 0.1uF | C_0805_2012Metric | C2, C3, C9 |
| 1 | 0.1uF | C_0603_1608Metric | C6 |
| 1 | 300pF | C_0805_2012Metric | C8 |
| 1 | 1uF | C_0805_2012Metric | C10 |
| 4 | 100nF | C_0603_1608Metric | C11, C12, C13, C17 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.7uF | C_0603_1608Metric | C14, C18 |
| 1 | 1uF | C_0603_1608Metric | C15 |
| 1 | 10nF | C_0603_1608Metric | C16 |
| 1 | 180k | R_0805_2012Metric | R1 |
| 2 | 100k | R_0603_1608Metric | R2, R8 |
| 1 | 22k | R_0805_2012Metric | R3 |
| 3 | 10k | R_0805_2012Metric | R4, R5, R7 |
| 1 | 90.9k | R_0805_2012Metric | R6 |
| 1 | 240 | R_0805_2012Metric | R9 |
| 1 | 390 | R_0805_2012Metric | R10 |
STM32newpowerbackup design files
The KiCad project lives in the TeganJohnson/Tic-Tac-ToeClawMachine repository on GitHub; these links point at the commit this page was built from.
STM32newpowerbackup: common questions
What microcontroller does the STM32newpowerbackup use?
The STM32newpowerbackup is built around the STM32F091RCTx, from the STM32 family.
How big is the STM32newpowerbackup PCB?
The STM32newpowerbackup measures 177.8 × 101.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32newpowerbackup?
44 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32newpowerbackup design files?
From the TeganJohnson/Tic-Tac-ToeClawMachine repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the STM32newpowerbackup design in my own project?
The repository has no license, so all rights stay with TeganJohnson. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32newpowerbackup without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Tic-Tac-ToeClawMachine
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k