-apsis-

tejcodes-rex·-apsis-·hardware/apsis-ground-node.net

This repository ships a schematic but no board layout.

About the -apsis- PCB

-apsis- is an open source PCB design by tejcodes-rex, published on GitHub. It is a board, with 13 components from 11 distinct parts.

Other key parts include the SPF5189Z, SE4150L and AP2112K-3.3TRG1. By type, the board carries 3 ICs, 3 connectors, 2 capacitors, 1 LED, 1 inductor and 1 resistor.

It belongs with the rf & radio designs in this gallery.

From the project

The APSIS Ground Node is a low cost, GPS disciplined satellite receiver that closes the loop on the APSIS platform. The software side predicts where objects will be; the Ground Node observes real passes and feeds timing and Doppler measurements back, which is exactly the input an

The APSIS Ground Node is a low cost, GPS disciplined satellite receiver that closes the loop on the APSIS platform. The software side predicts where objects will be; the Ground Node observes real passes and feeds timing and Doppler measurements back, which is exactly the input an orbit determination filter needs to shrink the position covariance that drives collision probability. Better observations make the conjunction screening sharper. A distributed mesh of these nodes turns hobby grade hardware into a contributing sensor network.

Main components on the -apsis-

-apsis- bill of materials (BOM)

13 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SPF5189Z
Qorvo
U1
1
SE4150L
Skyworks
U2
1
AP2112K-3.3TRG1
AP2112K-3.3
Diodes Inc
U4
2
132134
SMA
Amphenol
J1, J2
1
USB4105-GF-A
USB-C
GCT
J3
1
B39431B3743
SAW_435MHz
Qualcomm
FL2
1
ESD5Z3.3T1G
onsemi
TVS1
1
GSBP137M5
SAW_137MHz
Golledge
FL1
1
0805CS-101XJLB
100nH
Coilcraft
L1
2
1nF
C3A, C3B
1
RC0402FR-0749R9L
49.9
Yageo
R1

-apsis- design files

The KiCad project lives in the tejcodes-rex/-apsis- repository on GitHub; these links point at the commit this page was built from.

-apsis-: common questions

How many components are on the -apsis-?

13 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the -apsis- design files?

From the tejcodes-rex/-apsis- repository on GitHub, which has a netlist and the BOM; the links under Design files point to each one.

Can I use the -apsis- design in my own project?

The repository has no license, so all rights stay with tejcodes-rex. Use it as a reference, and ask the author before reusing the design.

Similar boards