FT Hall
Telekomak·FiresportTimer·PCB/FT_Hall/FT_Hall.kicad_pcb
About the FT Hall PCB
FT Hall is an open source PCB design by Telekomak, published on GitHub. It is a 2-layer board measuring 8 × 17 mm, with 5 components from 4 distinct parts.
By type, the board carries 2 capacitors, 1 transistor, 1 connector and 1 resistor.
From the project
An open source firesport timer designed for "fire attack" discipline
FT Hall bill of materials (BOM)
5 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV4906K | SOT-23 | Q101 |
| 1 | Conn_01x03_Pin | 3_SMD_PADS | CON101 |
| 2 | 4.7nF, 25V | C_0603_1608Metric | C101, C102 |
| 1 | 200R | R_0603_1608Metric | R101 |
FT Hall design files
The KiCad project lives in the Telekomak/FiresportTimer repository on GitHub; these links point at the commit this page was built from.
FT Hall: common questions
How big is the FT Hall PCB?
The FT Hall measures 8 × 17 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FT Hall?
5 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FT Hall design files?
From the Telekomak/FiresportTimer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FT Hall design in my own project?
The repository has no license, so all rights stay with Telekomak. Use it as a reference, and ask the author before reusing the design.