FT MainBoard

Telekomak·FiresportTimer·PCB/FT_MainBoard/FT_MainBoard.kicad_pcb

FT MainBoard PCB layout, top view — open source AVR/Arduino board by Telekomak

About the FT MainBoard PCB

FT MainBoard is an open source AVR/Arduino PCB design by Telekomak, published on GitHub. It is a 2-layer board measuring 110 × 75 mm, with 62 components from 32 distinct parts.

Its main chip is the ATMEGA328PB-AU, from the AVR/Arduino family. Other key parts include the FT231XS-R, 74HC3G14DP,125 and L78M05ABDT. By type, the board carries 22 resistors, 16 capacitors, 5 connectors, 5 switches, 4 ICs and 3 LEDs.

From the project

An open source firesport timer designed for "fire attack" discipline

Main components on the FT MainBoard

FT MainBoard bill of materials (BOM)

62 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328PB-AU
ATmega328PB-AU
IC1
1
FT231XS-R
IC2
1
74HC3G14DP,125
IC3
1
L78M05ABDT
L78M05ABDT-TR
IC4
2
PMBT3904,215
Q1, Q2
2
Conn_01x02_Pin
CON1, CON4
2
Conn_01x04_Pin
CON3, CON5
1
AVR-ISP-6
CON6
1
Conn_01x16_Pin
HDR1
1
16MHZ
16MHz
OSC1
1
Vishay 64X 10K
RV1
3
SW_Push
SW1, SW2, SW3
1
SW_Push
SW4
1
SW_SPST
SW5
1
YELLOW
LED1
1
GREEN
LED2
1
RED
LED3
2
BZX384-B5V1,115
D1, D2
6
100nF
C1, C2, C5, C16, C17, C18
2
22pF
C3, C4
Show 12 more
QtyPartRefs
2
47pF
C6, C7
3
100n
C8, C9, C10
1
330nF
C11
2
1n
C14, C15
1
200R
R1
3
330R
R2, R3, R16
2
27R
R4, R5
6
1000R
R6, R7, R8, R9, R10, R11
4
10K
R12, R17, R18, R22
4
1.2K
R13, R14, R19, R20
1
330R
R15
1
4K7
R21

FT MainBoard design files

The KiCad project lives in the Telekomak/FiresportTimer repository on GitHub; these links point at the commit this page was built from.

FT MainBoard: common questions

What microcontroller does the FT MainBoard use?

The FT MainBoard is built around the ATMEGA328PB-AU, from the AVR/Arduino family.

How big is the FT MainBoard PCB?

The FT MainBoard measures 110 × 75 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FT MainBoard?

62 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the FT MainBoard design files?

From the Telekomak/FiresportTimer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the FT MainBoard design in my own project?

The repository has no license, so all rights stay with Telekomak. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FT MainBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in FiresportTimer

Similar boards