Panel
Telekomak·FiresportTimer·PCB/Production/panel.kicad_pcb
About the Panel PCB
Panel is an open source AVR/Arduino PCB design by Telekomak, published on GitHub. It is a 2-layer board measuring 110 × 121 mm, with 79 components from 45 distinct parts.
Its main chip is the ATMEGA328PB-AU, from the AVR/Arduino family. Other key parts include the FT231XS-R, 74HC3G14DP,125 and L78M05ABDT. By type, the board carries 24 resistors, 18 capacitors, 12 connectors, 5 transistors, 5 switches and 4 ICs.
From the project
An open source firesport timer designed for "fire attack" discipline
Main components on the Panel
Panel bill of materials (BOM)
79 components, 45 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA328PB-AU ATmega328PB-AU | TQFP-32_7x7mm_P0.8mm | IC1 |
| 1 | FT231XS-R | SSOP-20_3.9x8.7mm_P0.635mm | IC2 |
| 1 | 74HC3G14DP,125 | MSOP-8_3x3mm_P0.65mm | IC3 |
| 1 | L78M05ABDT L78M05ABDT-TR | TO-252-2 | IC4 |
| 2 | PMBT3904,215 | SOT-23 | Q1, Q2 |
| 1 | TLV4906K | SOT-23 | Q101 |
| 1 | 2N7002,215 | SOT-23 | Q201 |
| 1 | IRFR9024N | TO-252-2 | Q202 |
| 2 | Conn_01x02_Pin | CON_2_pin | CON1, CON4 |
| 2 | Conn_01x04_Pin | CON_4_pin | CON3, CON5 |
| 1 | AVR-ISP-6 | IDC-Header_2x03_P2.54mm_Vertical | CON6 |
| 1 | Conn_01x03_Pin | 3_SMD_PADS | CON101 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Horizontal | CON201 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Horizontal | CON202, CON203 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Horizontal | CON204 |
| 1 | USB_B | USB_B_TE_5787834_Vertical | CON301 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | CON302 |
| 1 | BSMD0603-025-12V | Fuse_0603_1608Metric | F201 |
| 1 | Conn_01x16_Pin | PinHeader_1x16_P2.54mm_Vertical | HDR1 |
| 1 | 16MHZ 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | OSC1 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Vishay 64X 10K | PinHeader_1x03_P2.54mm_Vertical | RV1 |
| 3 | SW_Push | SW_PUSH-12mm | SW1, SW2, SW3 |
| 1 | SW_Push | switch | SW4 |
| 1 | SW_SPST | SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW5 |
| 1 | VAL** | mouse-bite-2mm-slot | mouse-bite-2mm-slot |
| 1 | VAL** | mouse-bite-3mm-slot | mouse-bite-3mm-slot |
| 1 | YELLOW | LED_0603_1608Metric | LED1 |
| 1 | GREEN | LED_0603_1608Metric | LED2 |
| 1 | RED | LED_0603_1608Metric | LED3 |
| 2 | BZX384-B5V1,115 | D_SOD-323 | D1, D2 |
| 6 | 100nF | C_0603_1608Metric | C1, C2, C5, C16, C17, C18 |
| 2 | 22pF | C_0603_1608Metric | C3, C4 |
| 2 | 47pF | C_0603_1608Metric | C6, C7 |
| 3 | 100n | C_0603_1608Metric | C8, C9, C10 |
| 1 | 330nF | C_0603_1608Metric | C11 |
| 2 | 1n | C_0603_1608Metric | C14, C15 |
| 2 | 4.7nF, 25V | C_0603_1608Metric | C101, C102 |
| 2 | 200R | R_0603_1608Metric | R1, R101 |
| 3 | 330R | R_0603_1608Metric | R2, R3, R16 |
| 2 | 27R | R_0603_1608Metric | R4, R5 |
| 6 | 1000R | R_0603_1608Metric | R6, R7, R8, R9, R10, R11 |
| 5 | 10K | R_0603_1608Metric | R12, R17, R18, R22, R201 |
| 4 | 1.2K | C_0603_1608Metric | R13, R14, R19, R20 |
| 1 | 330R | R_0603_1608Metric | R15 |
| 1 | 4K7 | R_0603_1608Metric | R21 |
Panel design files
The KiCad project lives in the Telekomak/FiresportTimer repository on GitHub; these links point at the commit this page was built from.
Panel: common questions
What microcontroller does the Panel use?
The Panel is built around the ATMEGA328PB-AU, from the AVR/Arduino family.
How big is the Panel PCB?
The Panel measures 110 × 121 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Panel?
79 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Panel design files?
From the Telekomak/FiresportTimer repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Panel design in my own project?
The repository has no license, so all rights stay with Telekomak. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Panel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in FiresportTimer
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k