Keebs rs
temataro·keebs-rs·ataro_v0.2/ataro_v0.2.kicad_pcb
About the Keebs rs PCB
Keebs rs is an open source AVR/Arduino PCB design by temataro, published on GitHub. It is a 4-layer board measuring 202.6 × 151 mm, with 82 components from 42 distinct parts.
Its main chip is the ProMicro, from the AVR/Arduino family. By type, the board carries 35 switches, 35 diodes, 1 IC and 1 connector.
It belongs with the keyboards designs in this gallery.
From the project
Soldered with Epomaker Budgerigar switches, and LL4148 MELF diodes. Using a cheap Arduino Pro Micro clone from aliexpress as the microcontroller.

Main components on the Keebs rs
Keebs rs bill of materials (BOM)
82 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro | Arduino_Pro_Micro | U1 |
| 1 | 4PIN | TRRS_PJ-320A | J1 |
| 1 | RE111F-41B3N-20F-20P-N Encoder_Rotary_11mm_SPST_DShaft Alpha Taiwan | ENC_SPST_12mm | ENC1 |
| 1 | SW_RST | SW_PUSH_6mm_H13mm | RSW1 |
| 2 | R_DIN0204_P2.54MM R_DIN0204_P2.54mm | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | Rrx1, Rtx1 |
| 1 | ESC | MX_PCB_1.25u | SW1 |
| 1 | TILDE | MX_PCB_1.00u_Reversable | SW2 |
| 1 | 1 | MX_PCB_1.00u_Reversable | SW3 |
| 1 | 2 | MX_PCB_1.00u_Reversable | SW4 |
| 1 | 3 | MX_PCB_1.00u_Reversable | SW5 |
| 1 | 4 | MX_PCB_1.00u_Reversable | SW6 |
| 1 | 5 | MX_PCB_1.00u_Reversable | SW7 |
| 1 | TAB | MX_PCB_1.50u | SW8 |
| 1 | Q | MX_PCB_1.00u_Reversable | SW9 |
| 1 | W | MX_PCB_1.00u_Reversable | SW10 |
| 1 | E | MX_PCB_1.00u_Reversable | SW11 |
| 1 | R | MX_PCB_1.00u_Reversable | SW12 |
| 1 | T | MX_PCB_1.00u_Reversable | SW13 |
| 1 | Y | MX_PCB_1.00u_Reversable | SW14 |
| 1 | CAPSLOCK | MX_PCB_1.75u | SW15 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A | MX_PCB_1.00u_Reversable | SW16 |
| 1 | S | MX_PCB_1.00u_Reversable | SW17 |
| 1 | D | MX_PCB_1.00u_Reversable | SW18 |
| 1 | F | MX_PCB_1.00u_Reversable | SW19 |
| 1 | G | MX_PCB_1.00u_Reversable | SW20 |
| 1 | { | MX_PCB_1.00u_Reversable | SW21 |
| 1 | SHIFT | MX_PCB_1.75u | SW22 |
| 1 | Z | MX_PCB_1.00u_Reversable | SW23 |
| 1 | X | MX_PCB_1.00u_Reversable | SW24 |
| 1 | C | MX_PCB_1.00u_Reversable | SW25 |
| 2 | V | MX_PCB_1.00u_Reversable | SW26, SW31 |
| 1 | B | MX_PCB_1.00u_Reversable | SW27 |
| 1 | } | MX_PCB_1.00u_Reversable | SW28 |
| 1 | CTRL | MX_PCB_1.25u | SW29 |
| 1 | ^ | MX_PCB_1.00u_Reversable | SW30 |
| 1 | SUPER | MX_PCB_1.25u | SW32 |
| 1 | ALT | MX_PCB_1.25u | SW33 |
| 1 | SPACE | MX_PCB_2.00u | SW34 |
| 1 | BACKSPACE | MX_PCB_2.00u | SW35 |
| 1 | HOLE | HOLE_M2 | TH2 |
| 5 | HOLE | HOLE_M2_TH | TH3, TH4, TH5, TH6, TH7 |
| 35 | D | Diode_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +27 |
Keebs rs design files
The KiCad project lives in the temataro/keebs-rs repository on GitHub; these links point at the commit this page was built from.
Keebs rs: common questions
What microcontroller does the Keebs rs use?
The Keebs rs is built around the ProMicro, from the AVR/Arduino family.
How big is the Keebs rs PCB?
The Keebs rs measures 202.6 × 151 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Keebs rs?
82 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Keebs rs design files?
From the temataro/keebs-rs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Keebs rs design in my own project?
The repository has no license, so all rights stay with temataro. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Keebs rs without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k