4 lines umemory
tensorway·2000transistors·src/4_lines_umemory.kicad_pcb
About the 4 lines umemory PCB
4 lines umemory is an open source PCB design by tensorway, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 117 components from 10 distinct parts.
By type, the board carries 68 transistors, 20 switches, 20 resistors, 5 connectors and 4 diodes.
From the project
The project is made in Kicad. If you want to learn more about it visit howcpuworks.com.
The project is made in Kicad. If you want to learn more about it visit howcpuworks.com.
While I could fix the bugs I do not want to check is everything working again because I would need to solder things again. This is why I list them, so you can either fix them yourselves before or after soldering (I did after). Some bugs are just layout bugs, which means you need to be aware of them but not necessarily fix them.

4 lines umemory bill of materials (BOM)
117 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 68 | 2N7000 | 2n7000_tight | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +60 |
| 1 | Conn_01x04_Male | 4pin_tight | J1 |
| 2 | Conn_01x02_Male | 2pin_tight | J2, J3 |
| 2 | Conn_01x16_Male | 16pin_tight | J4, J5 |
| 12 | SW_DIP_x03 | dip3_switch | SW1, SW2, SW3, SW6, SW7, SW8, SW11, SW12 +4 |
| 4 | SW_DIP_x02 | dip2_switch | SW4, SW9, SW14, SW19 |
| 4 | SW_DIP_x05 | dip5_switch | SW5, SW10, SW15, SW20 |
| 4 | LED | led_5mm_tight | D1, D2, D3, D4 |
| 16 | R | resistor_tight | R1, R2, R3, R4, R5, R6, R7, R8 +8 |
| 4 | R | resistor_led_tight | R17, R18, R19, R20 |
4 lines umemory design files
The KiCad project lives in the tensorway/2000transistors repository on GitHub; these links point at the commit this page was built from.
4 lines umemory: common questions
How big is the 4 lines umemory PCB?
The 4 lines umemory measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 4 lines umemory?
117 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the 4 lines umemory design files?
From the tensorway/2000transistors repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 4 lines umemory design in my own project?
The repository has no license, so all rights stay with tensorway. Use it as a reference, and ask the author before reusing the design.
More boards in 2000transistors
Adder
tensorway
100 × 100 mm208 parts2LNo license0Register
tensorway
150 × 100 mm204 parts2LNo license0Add select board
tensorway
100 × 100 mm203 parts2LNo license0Pc step board
tensorway
100 × 100 mm177 parts2LNo license0Umem distribution
tensorway
100 × 100 mm168 parts2LNo license0Flags board
tensorway
100 × 100 mm158 parts2LNo license0Alu
tensorway
100 × 100 mm157 parts2LNo license05decoder32 half
tensorway
100 × 100 mm114 parts2LNo license0Clock board
tensorway
100 × 100 mm109 parts2LNo license0Keyboard
tensorway
100 × 100 mm103 parts2LNo license0AVR/Arduino
Memory board
tensorway
100 × 100 mm53 parts2LNo license0