Clock board
tensorway·2000transistors·src/clock_board.kicad_pcb
About the Clock board
Clock board is an open source PCB design by tensorway, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 109 components from 15 distinct parts.
Other key parts include the slide_switch. By type, the board carries 45 resistors, 40 transistors, 12 connectors, 6 capacitors, 2 ICs and 2 switches.
From the project
The project is made in Kicad. If you want to learn more about it visit howcpuworks.com.
The project is made in Kicad. If you want to learn more about it visit howcpuworks.com.
While I could fix the bugs I do not want to check is everything working again because I would need to solder things again. This is why I list them, so you can either fix them yourselves before or after soldering (I did after). Some bugs are just layout bugs, which means you need to be aware of them but not necessarily fix them.

Main components on the Clock board
Clock board bill of materials (BOM)
109 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | slide_switch | slide_switch | U1, U2 |
| 36 | 2N7000 | 2n7000_tight | Q1, Q2, Q7, Q8, Q9, Q10, Q11, Q12 +28 |
| 4 | 2N2219 | bjt | Q3, Q4, Q5, Q6 |
| 2 | Conn_01x01_Male | 1pin | J1, J2 |
| 3 | Conn_01x02_Male | 2pin_tight | J3, J4, J12 |
| 2 | Conn_01x11_Male | 11pin_tight | J5, J6 |
| 2 | Conn_01x05_Male | 5pin_tight | J7, J11 |
| 2 | alu_sel | 3pin_tight | J8, J9 |
| 1 | flags_enable_out | 1pin | J10 |
| 2 | SW_Push_Dual | push_button | SW1, SW2 |
| 2 | LED | led_5mm_tight | D1, D2 |
| 4 | CP | capacitor | C1, C2, C3, C4 |
| 2 | C | capacitor | C5, C6 |
| 43 | R | resistor_tight | R1, R2, R5, R6, R7, R8, R9, R10 +35 |
| 2 | R | resistor_led_tight | R3, R4 |
Clock board design files
The KiCad project lives in the tensorway/2000transistors repository on GitHub; these links point at the commit this page was built from.
Clock board: common questions
How big is the Clock board?
The Clock board measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Clock board?
109 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Clock board design files?
From the tensorway/2000transistors repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Clock board design in my own project?
The repository has no license, so all rights stay with tensorway. Use it as a reference, and ask the author before reusing the design.
More boards in 2000transistors
Adder
tensorway
100 × 100 mm208 parts2LNo license0Register
tensorway
150 × 100 mm204 parts2LNo license0Add select board
tensorway
100 × 100 mm203 parts2LNo license0Pc step board
tensorway
100 × 100 mm177 parts2LNo license0Umem distribution
tensorway
100 × 100 mm168 parts2LNo license0Flags board
tensorway
100 × 100 mm158 parts2LNo license0Alu
tensorway
100 × 100 mm157 parts2LNo license04 lines umemory
tensorway
100 × 100 mm117 parts2LNo license05decoder32 half
tensorway
100 × 100 mm114 parts2LNo license0Keyboard
tensorway
100 × 100 mm103 parts2LNo license0AVR/Arduino
Memory board
tensorway
100 × 100 mm53 parts2LNo license0