Memory board
tensorway·2000transistors·src/memory_board.kicad_pcb
About the Memory board
Memory board is an open source AVR/Arduino PCB design by tensorway, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 53 components from 10 distinct parts.
Its main chip is the arduino_nano, from the AVR/Arduino family. Other key parts include the usb_c_power. By type, the board carries 13 transistors, 13 diodes, 13 resistors, 10 connectors and 3 ICs.
From the project
The project is made in Kicad. If you want to learn more about it visit howcpuworks.com.
The project is made in Kicad. If you want to learn more about it visit howcpuworks.com.
While I could fix the bugs I do not want to check is everything working again because I would need to solder things again. This is why I list them, so you can either fix them yourselves before or after soldering (I did after). Some bugs are just layout bugs, which means you need to be aware of them but not necessarily fix them.

Main components on the Memory board
Memory board bill of materials (BOM)
53 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | arduino_nano | arduino_nano | U1, U2 |
| 1 | usb_c_power | usb_c_power | U3 |
| 13 | 2N7000 | 2n7000_tight | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +5 |
| 6 | Conn_01x02_Male | 2pin_tight | J1, J2, J4, J5, J8, J9 |
| 2 | Conn_01x11_Male | 11pin_tight | J3, J6 |
| 1 | emergency_pins_1 | 2pin_tight | J7 |
| 1 | emergency_pins_2 | 2pin_tight | J10 |
| 1 | Conn_01x11_Male | 11pin_tight | Address1 |
| 13 | LED | led_5mm_tight | D1, D2, D3, D4, D5, D6, D7, D8 +5 |
| 13 | R | resistor_led_tight | R1, R2, R3, R4, R5, R6, R7, R8 +5 |
Memory board design files
The KiCad project lives in the tensorway/2000transistors repository on GitHub; these links point at the commit this page was built from.
Memory board: common questions
What microcontroller does the Memory board use?
The Memory board is built around the arduino_nano, from the AVR/Arduino family.
How big is the Memory board?
The Memory board measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Memory board?
53 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Memory board design files?
From the tensorway/2000transistors repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Memory board design in my own project?
The repository has no license, so all rights stay with tensorway. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Memory board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in 2000transistors
Adder
tensorway
100 × 100 mm208 parts2LNo license0Register
tensorway
150 × 100 mm204 parts2LNo license0Add select board
tensorway
100 × 100 mm203 parts2LNo license0Pc step board
tensorway
100 × 100 mm177 parts2LNo license0Umem distribution
tensorway
100 × 100 mm168 parts2LNo license0Flags board
tensorway
100 × 100 mm158 parts2LNo license0Alu
tensorway
100 × 100 mm157 parts2LNo license04 lines umemory
tensorway
100 × 100 mm117 parts2LNo license05decoder32 half
tensorway
100 × 100 mm114 parts2LNo license0Clock board
tensorway
100 × 100 mm109 parts2LNo license0Keyboard
tensorway
100 × 100 mm103 parts2LNo license0
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k