RMTS-Replacement

Terrapin-Rocket-Team·Solids·RMTS-Replacement/RMTS-Replacement.kicad_pcb

RMTS-Replacement PCB layout, top view — open source NXP board by Terrapin-Rocket-Team

About the RMTS-Replacement PCB

RMTS-Replacement is an open source NXP PCB design by Terrapin-Rocket-Team, published on GitHub. It is a 2-layer board measuring 48 × 68 mm, with 19 components from 11 distinct parts.

Its main chip is the teensy, from the NXP family. Other key parts include the ADS1219, MCP6N16 and LM4040DBZ-2.5. By type, the board carries 7 resistors, 5 capacitors, 3 ICs and 3 connectors.

From the project

-High Altitude Solid: 6" P motor meant to fly to 70k ft

-High Altitude Solid: 6" P motor meant to fly to 70k ft

-SAC 2024 Motor: 4" N motor meant to fly to 10k ft

Main components on the RMTS-Replacement

RMTS-Replacement bill of materials (BOM)

19 components, 11 distinct parts.

QtyPartRefs
1
ADS1219
U1
1
MCP6N16
U2
1
LM4040DBZ-2.5
U3
2
Conn_01x04
J1, J3
1
Conn_01x03
J2
1
~
Teensy4.1
3
0.1uF
C1, C2, C4
1
0.47uF
C3
1
4.7uF
C5
6
1k
R1, R2, R3, R5, R6, R7
1
250k
R4

RMTS-Replacement design files

The KiCad project lives in the Terrapin-Rocket-Team/Solids repository on GitHub; these links point at the commit this page was built from.

RMTS-Replacement: common questions

What microcontroller does the RMTS-Replacement use?

The RMTS-Replacement is built around the teensy, from the NXP family.

How big is the RMTS-Replacement PCB?

The RMTS-Replacement measures 48 × 68 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RMTS-Replacement?

19 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the RMTS-Replacement design files?

From the Terrapin-Rocket-Team/Solids repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RMTS-Replacement design in my own project?

The repository has no license, so all rights stay with Terrapin-Rocket-Team. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RMTS-Replacement without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in Solids

Similar boards