Soldered-OLED-0.96-hardware design
test-gh-syncer2·Soldered-OLED-0.96-hardware-design·CAD/V1.1.1/0.96_OLED.kicad_pcb
About the Soldered-OLED-0.96-hardware design PCB
Soldered-OLED-0.96-hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 30 × 30 mm, with 35 components from 17 distinct parts.
Other key parts include the NMOS-DUAL, SE5218 and OLED_GME12864_30P. By type, the board carries 9 capacitors, 9 resistors, 6 jumpers, 3 ICs, 3 relays and 1 diode.
It belongs with the displays & leds designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for OLED-0.96 designed by Soldered.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Soldered-OLED-0.96-hardware design
Soldered-OLED-0.96-hardware design bill of materials (BOM)
35 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NMOS-DUAL | SOT-363 | U1 |
| 1 | SE5218 | SOT-23-5 | U2 |
| 1 | OLED_GME12864_30P OLED_GME12864_30p | OLED_GME128x64_30p | U3 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 2 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP1, JP3 |
| 2 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP2, JP4 |
| 2 | SMD_JUMPER | SMD_JUMPER | JP5, JP6 |
| 2 | easyC-SMD | easyC-connector | K1, K2 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K3 |
| 1 | purple | 0402LED | D1 |
| 4 | 2U2 2u2 | 0603C | C1, C2, C5, C8 |
| 3 | 10U 10u | 1206C | C3, C7, C9 |
| 1 | 1u | 0603C | C4 |
| 1 | 100N 100n | 0603C | C6 |
| 7 | 10K 10k | 0603R | R1, R2, R3, R4, R6, R7, R8 |
| 1 | 2K2 2k2 | 0402R | R5 |
| 1 | 390K 390k | 0603R | R9 |
Soldered-OLED-0.96-hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-OLED-0.96-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-OLED-0.96-hardware design: common questions
How big is the Soldered-OLED-0.96-hardware design PCB?
The Soldered-OLED-0.96-hardware design measures 30 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-OLED-0.96-hardware design?
35 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-OLED-0.96-hardware design design files?
From the test-gh-syncer2/Soldered-OLED-0.96-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-OLED-0.96-hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k