56 open source boards using the SE5218

Real designs built with the SE5218, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

56 boardsClear filters|Most starred

How designs wire the SE5218

Read from the KiCad layouts of 47 open source designs, one per repository: what each pin of the SE5218 connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a capacitor to GND on 47 of 47 designs, most often 2.2 µF (then 100 nF).
  • The EN pin has a capacitor to GND on 47 of 47 designs, most often 2.2 µF (then 100 nF).
  • The VOUT pin has a decoupling capacitor on 46 of 47 designs, most often 2.2 µF (then 100 nF).
VINpin 1Connected to: Signal 83% · 5V 17%
  • Capacitor to GND on 100% · 2.2 µF (46), 100 nF (7), 10 µF (2)
GNDpin 2Connected to: GND 100%
ENpin 3Connected to: Signal 83% · 5V 17%
  • Capacitor to GND on 100% · 2.2 µF (46), 100 nF (5), 10 µF (2)
NCpin 4Connected to: Not connected 100%
VOUTpin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 98% · 2.2 µF (45), 100 nF (3)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MicroSD-module by colinleroy, CAN-Transceiver-MCP2518-board hardware design by SolderedElectronics, USB-UART-CH340C-converter board hardware design by SolderedElectronics and CONNECT programmer by SolderedElectronics.

The SE5218 in open source designs

The gallery holds 56 open source boards using the SE5218 from 47 GitHub repositories; a typical one measures about 25.7 × 38 mm and carries around 27 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Mini-SMD-Angled by colinleroy.

Microcontrollers on boards using the SE5218

SE5218: common questions

Where can I find a SE5218 reference design?

Each of the 56 boards on this page is a real design using the SE5218. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SE5218 VIN pin connected?

The VIN pin has a capacitor to GND on 47 of 47 designs, most often 2.2 µF (then 100 nF). Counted from the KiCad layouts of 47 open source designs using the SE5218.

How is the SE5218 EN pin connected?

The EN pin has a capacitor to GND on 47 of 47 designs, most often 2.2 µF (then 100 nF). Counted from the KiCad layouts of 47 open source designs using the SE5218.

What decoupling capacitors do designs use on the SE5218 VOUT pin?

The VOUT pin has a decoupling capacitor on 46 of 47 designs, most often 2.2 µF (then 100 nF). Counted from the KiCad layouts of 47 open source designs using the SE5218.

What parts are used alongside the SE5218?

The NMOS-DUAL, CH340C, TXB0104QPWRQ1, APDS-9960 and OLED_GME12864_30P appear in the most repositories here.

Which microcontrollers do boards using the SE5218 use?

Most are built on AVR/Arduino (2) and ESP8266 (2).

How big is a typical board using the SE5218?

The median is 25.7 × 38 mm, and 100% are two-layer designs.

What is the most popular open source board using the SE5218?

By GitHub stars, Mini-SMD-Angled by colinleroy, with 20 stars.

Can I simulate one of these boards using the SE5218 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part