Light sensor easyC

test-gh-syncer2·Soldered-Simple-light-sensor-board-with-easyC-hardware-design·CAD/V1.1.1/Simple_sensor_easyC.kicad_pcb

Light sensor easyC PCB layout, top view — open source AVR/Arduino board by test-gh-syncer2

About the Light sensor easyC PCB

Light sensor easyC is an open source AVR/Arduino PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 22 mm, with 18 components from 11 distinct parts.

Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. By type, the board carries 6 relays, 4 resistors, 2 capacitors, 1 IC and 1 diode.

It belongs with the sensors designs in this gallery.

From the project

Hardware design, BOM, gerbers, 3D files and pinout for Simple-light-sensor-board-with-easyC designed by Soldered.

All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.

Main components on the Light sensor easyC

Light sensor easyC bill of materials (BOM)

18 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATTINY404-SSNR
U1
4
HOLE_3.2MM
HOLE_3.2mm
H1, H2, H3, H4
1
JST-SH_2PIN_1MM_C145954
JST-SH_2pin_1mm_C145954
K1
1
HEADER_MALE_2X1
K2
2
easyC-SMD
K3, K5
1
HEADER-UPDI
K4
1
DSHP03TS-S
K6
1
purple
D1
2
0.1UF
0.1uF
C1, C2
3
10K
10k
R1, R3, R4
1
2K2
2k2
R2

Light sensor easyC design files

The KiCad project lives in the test-gh-syncer2/Soldered-Simple-light-sensor-board-with-easyC-hardware-design repository on GitHub; these links point at the commit this page was built from.

Light sensor easyC: common questions

What microcontroller does the Light sensor easyC use?

The Light sensor easyC is built around the ATTINY404-SSNR, from the AVR/Arduino family.

How big is the Light sensor easyC PCB?

The Light sensor easyC measures 38 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Light sensor easyC?

18 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Light sensor easyC design files?

From the test-gh-syncer2/Soldered-Simple-light-sensor-board-with-easyC-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Light sensor easyC design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.

Can I test firmware for the Light sensor easyC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Soldered-Simple-light-sensor-board-with-easyC-hardware-design

Similar boards