KicadProject ArduinoUno
Tetteh-EkuPrince·KicadProject_ArduinoUno·Arduino Uno_complete/Arduino Uno.kicad_pcb
About the KicadProject ArduinoUno PCB
KicadProject ArduinoUno is an open source AVR/Arduino PCB design by Tetteh-EkuPrince, published on GitHub. It is a 2-layer board measuring 70 × 50.5 mm, with 43 components from 33 distinct parts.
Its main chip is the ATmega16U2-M, from the AVR/Arduino family. Other key parts include the NCP1117-3.3_SOT223, ATmega328P-P, LMV358 and LP2985-3.3. By type, the board carries 7 connectors, 6 ICs, 6 capacitors, 5 resistors, 3 LEDs and 3 diodes.
Main components on the KicadProject ArduinoUno
KicadProject ArduinoUno bill of materials (BOM)
43 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U2 |
| 1 | ATmega16U2-M | QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm | U3 |
| 1 | ATmega328P-P | DIP-28_W7.62mm | U4 |
| 2 | LMV358 | MSOP-8_3x3mm_P0.65mm | U5, U7 |
| 1 | LP2985-3.3 | SOT-23-5 | U6 |
| 1 | 16Hz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | Resonator_Small | Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y2 |
| 1 | USB_B | USB-B-S-X-X-TH | J1 |
| 1 | Barrel_Jack_MountingPin | BarrelJack_Horizontal | J2 |
| 2 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J3, J5 |
| 2 | Conn_01x08 | PinSocket_1x08_P2.54mm_Vertical | J4, J6 |
| 1 | Conn_02x02_Odd_Even | PinHeader_2x02_P1.27mm_Vertical | J8 |
| 1 | 6X1F-H8.5 | PinSocket_1x06_P2.54mm_Vertical | AD1 |
| 1 | MF-MSMF050-2 | FUSM4632X85 | F1 |
| 1 | 10X1F-H8.5 | PinSocket_1x10_P2.54mm_Vertical | IOH1 |
| 2 | 47u | CP_Elec_6.3x5.4 | PC1, PC2 |
| 2 | Varistor | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | RV2, RV3 |
| 1 | SW_Push_Shielded | SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 | SW2 |
| 1 | FDN340P | SOT-23 | T1 |
| 1 | ON | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | GREEN1 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | YELLOW | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | RX1, TX1 |
| 1 | 1N914 | D_SOD-123 | D2 |
| 1 | CD1206-S01575 | D_SOD-123 | D3 |
| 1 | 1N4007 | D_DO-41_SOD81_P7.62mm_Horizontal | D4 |
| 1 | BLM21 | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | YELLOW | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L2 |
| 3 | 100N | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C5, C6 |
| 1 | 1u | C_01005_0402Metric | C3 |
| 2 | 22p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C11 |
| 1 | 1M | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1 |
| 1 | R | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R2 |
| 1 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RN1C1 |
| 2 | 22R | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | RN3A1, RN3D1 |
KicadProject ArduinoUno design files
The KiCad project lives in the Tetteh-EkuPrince/KicadProject_ArduinoUno repository on GitHub; these links point at the commit this page was built from.
KicadProject ArduinoUno: common questions
What microcontroller does the KicadProject ArduinoUno use?
The KicadProject ArduinoUno is built around the ATmega16U2-M, from the AVR/Arduino family.
How big is the KicadProject ArduinoUno PCB?
The KicadProject ArduinoUno measures 70 × 50.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the KicadProject ArduinoUno?
43 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the KicadProject ArduinoUno design files?
From the Tetteh-EkuPrince/KicadProject_ArduinoUno repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the KicadProject ArduinoUno design in my own project?
The repository has no license, so all rights stay with Tetteh-EkuPrince. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the KicadProject ArduinoUno without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k