71 open source boards using the ATmega328P-P

Real designs built with the ATmega328P-P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

71 boardsClear filters|Most starred

How designs wire the ATmega328P-P

Read from the KiCad layouts of 54 open source designs, one per repository: what each pin of the ATmega328P-P connects to, and the resistors, capacitors and other passives placed on it.

  • The XTAL1/PB6 pin has a capacitor to GND on 41 of 54 designs, most often 22 pF (then 20 pF).
  • The XTAL2/PB7 pin has a capacitor to GND on 41 of 54 designs, most often 22 pF (then 20 pF).
  • The XTAL1/PB6 pin has a crystal on 40 of 54 designs, most often 16 MHz (then 7.3728 MHz).
  • The XTAL2/PB7 pin has a crystal on 40 of 54 designs, most often 16 MHz (then 7.3728 MHz).
RESET/PC6pin 1Connected to: A connector 60%
  • Pull-up to 5V on 70% · 10 kΩ (34), 1 kΩ (2)
VCCpin 7Connected to: 5V 87%
  • Decoupling capacitor on 39% · 100 nF (21), 10 µF (3), 22 pF (1)
GNDpin 8, 22Connected to: GND 98%
XTAL1/PB6pin 9Connected to: Signal 89%
  • Capacitor to GND on 76% · 22 pF (29), 20 pF (6), 18 pF (2)
  • Crystal on 74% · 16 MHz (22), 7.3728 MHz (1), 9.216 MHz (1)
XTAL2/PB7pin 10Connected to: Signal 91%
  • Capacitor to GND on 76% · 22 pF (29), 20 pF (6), 18 pF (2)
  • Crystal on 74% · 16 MHz (22), 7.3728 MHz (1), 9.216 MHz (1)
AVCCpin 20Connected to: 5V 83%
  • Decoupling capacitor on 46% · 100 nF (27), 220 nF (1), 10 µF (1)
AREFpin 21Connected to: Signal 43% · not connected 39%
  • Capacitor to GND on 41% · 100 nF (22)

20 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Apple2Card by profdc9, ISACard by profdc9, Mainboard by jypma and Kamaji classic v1 by iley.

The ATmega328P-P in open source designs

The gallery holds 71 open source boards using the ATmega328P-P from 57 GitHub repositories; a typical one measures about 83.2 × 79 mm and carries around 41 components.

96% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.

The most starred is Apple2Card by profdc9.

Microcontrollers on boards using the ATmega328P-P

ATmega328P-P: common questions

Where can I find a ATmega328P-P reference design?

Each of the 71 boards on this page is a real design using the ATmega328P-P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ATmega328P-P XTAL1/PB6 pin connected?

The XTAL1/PB6 pin has a capacitor to GND on 41 of 54 designs, most often 22 pF (then 20 pF). Counted from the KiCad layouts of 54 open source designs using the ATmega328P-P.

How is the ATmega328P-P XTAL2/PB7 pin connected?

The XTAL2/PB7 pin has a capacitor to GND on 41 of 54 designs, most often 22 pF (then 20 pF). Counted from the KiCad layouts of 54 open source designs using the ATmega328P-P.

What pull-up resistor is used on the ATmega328P-P RESET/PC6 pin?

The RESET/PC6 pin has a pull-up to 5V on 38 of 54 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 54 open source designs using the ATmega328P-P.

What parts are used alongside the ATmega328P-P?

The LM7805_TO220, L7805, AMS1117-3.3, 28C256 and 82C55A appear in the most repositories here.

Which microcontrollers do boards using the ATmega328P-P use?

Most are built on AVR/Arduino (67), ESP8266 (3) and ESP32 (1).

How big is a typical board using the ATmega328P-P?

The median is 83.2 × 79 mm, and 96% are two-layer designs.

What is the most popular open source board using the ATmega328P-P?

By GitHub stars, Apple2Card by profdc9, with 95 stars.

Can I simulate one of these boards using the ATmega328P-P before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part