Potensic-ATOM-USB-C-Replacement-Cable
TheAndiF·Potensic-ATOM-USB-C-Replacement-Cable·hardware/schematic/USB_C_auf_C_Sammelpunkte_Verdrahtet.kicad_sch
About the Potensic-ATOM-USB-C-Replacement-Cable PCB
Potensic-ATOM-USB-C-Replacement-Cable is an open source PCB design by TheAndiF, published on GitHub under the CC-BY-4.0 license. It is a board, with 4 components from 3 distinct parts.
By type, the board carries 2 connectors and 2 resistors.
It belongs with the robotics & motion and test & measurement designs in this gallery.
From the project
Reverse-engineered USB-C replacement adapter for Potensic ATOM DSRC02A controllers, with KiCad schematic, measured wiring, prototype test and 3D-printable holder.
Open-source, reverse-engineered USB-C replacement adapter for the Potensic ATOM drone controller (DSRC02A) and Android smartphones. KiCad schematic, measured wiring, DIY build guide, tested prototype and a 3D-printable strain-relief holder.
Schematic · Wiring & measurements · Build guide · Compatibility & tests · Bill of materials
The original cable was investigated with a multimeter, its wiring was reconstructed in KiCad, and a working prototype was built and tested. This repository shares the schematic, editable design, 3D-printable holder, construction notes and observed behavior.
Potensic-ATOM-USB-C-Replacement-Cable bill of materials (BOM)
4 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USB-C-male-26Pads | P1 | |
| 1 | USB-C-male-26Pads / 2 | P2 | |
| 2 | 56k 1% | R1, R2 |
Potensic-ATOM-USB-C-Replacement-Cable design files
The KiCad project lives in the TheAndiF/Potensic-ATOM-USB-C-Replacement-Cable repository on GitHub; these links point at the commit this page was built from.
Potensic-ATOM-USB-C-Replacement-Cable: common questions
How many components are on the Potensic-ATOM-USB-C-Replacement-Cable?
4 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Potensic-ATOM-USB-C-Replacement-Cable design files?
From the TheAndiF/Potensic-ATOM-USB-C-Replacement-Cable repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Potensic-ATOM-USB-C-Replacement-Cable design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which TheAndiF chose for the repository.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979