Spool plugs

TheCacophonyProject·spool-pcb·spool-plugs/spool-plugs.kicad_pcb

Spool plugs PCB layout, top view — open source board by TheCacophonyProject

About the Spool plugs PCB

Spool plugs is an open source PCB design by TheCacophonyProject, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 58 × 29 mm, with 4 components from 2 distinct parts.

By type, the board carries 3 diodes and 1 connector.

From the project

- 2 x Crimped leads: 455-4118-ND Can chop in half and use 2 of the ends for the motor and 2 for the magnet - 1 x 8 Pin cable assembly 455-3842-ND for connecting main and plug board. - 3 x Protection Diodes SS54-HF to be hand soldered onto the plug board.

- 2 x Crimped leads: 455-4118-ND Can chop in half and use 2 of the ends for the motor and 2 for the magnet - 1 x 8 Pin cable assembly 455-3842-ND for connecting main and plug board. - 3 x Protection Diodes SS54-HF to be hand soldered onto the plug board.

- 2 x Photo interrupter DY-ITR8402 - 1 x 2 Pin JST XA housing XAP-02V-1 - 1 x 3 Pin JST XA housing XAP-03V-1 - 2 x 8 Pin JST XA Plug S08B-XASK-1(LF)(SN) - 1 x Magnet rotary position sensor? Not too sure if this will end up being used or not. AS5600-ASOT

Spool plugs bill of materials (BOM)

4 components, 2 distinct parts.

QtyPartRefs
1
Conn_01x08
J202
3
D_Shockley
D201, D202, D203

Spool plugs design files

The KiCad project lives in the TheCacophonyProject/spool-pcb repository on GitHub; these links point at the commit this page was built from.

Spool plugs: common questions

How big is the Spool plugs PCB?

The Spool plugs measures 58 × 29 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Spool plugs?

4 components, from 2 distinct parts. The full bill of materials is listed on this page.

Where can I download the Spool plugs design files?

From the TheCacophonyProject/spool-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Spool plugs design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which TheCacophonyProject chose for the repository.

More boards in spool-pcb