Head hub
TheColonelYoung·3D_PREBO·Head_hub/Head_hub.kicad_pcb
About the Head hub PCB
Head hub is an open source PCB design by TheColonelYoung, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 42.5 × 17 mm, with 9 components from 5 distinct parts.
By type, the board carries 3 modules, 3 connectors and 3 capacitors.
It belongs with the robotics & motion designs in this gallery.
From the project
3D printer expansion board. Add more fan controllers, TMC2130 wiring support, induction probe voltage convertor, LED lighting (supports WS1812).
This project is 3D printer expansion board. Add more fan controllers, TMC2130 wiring support, induction probe voltage convertor, LED lighting (supports WS1812).
This board was designed for best compatibility with MKS GEN L, but is compatible for example with BIGTREETECH SKR 1.1.
- Stepdown regulator - from up to 35V to 12V - can by bypassed by jumper, if you have 12V power supply by solder jumper - minimal volatage for regulator is 15V - based on L5973D (up to 2A)

Head hub bill of materials (BOM)
9 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | Fan_3pin | FanPinHeader_1x03_P2.54mm_Vertical | M1, M2, M3 |
| 1 | X_END | JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | LED | JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | RJ45 | RJ45_Amphenol_54602-x08_Horizontal | J3 |
| 3 | 100nF | C_0603_1608Metric | C1, C2, C3 |
Head hub design files
The KiCad project lives in the TheColonelYoung/3D_PREBO repository on GitHub; these links point at the commit this page was built from.
Head hub: common questions
How big is the Head hub PCB?
The Head hub measures 42.5 × 17 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Head hub?
9 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Head hub design files?
From the TheColonelYoung/3D_PREBO repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Head hub design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which TheColonelYoung chose for the repository.
More boards in 3D_PREBO
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979