Nyxpad

thegreatalxx·nyxpad·PCB/nyxpad.kicad_pcb

Nyxpad PCB layout, top view — open source RP2040/RP2350 board by thegreatalxx

About the Nyxpad PCB

Nyxpad is an open source RP2040/RP2350 PCB design by thegreatalxx, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 70 mm, with 12 components from 6 distinct parts.

Its main chip is the XIAO-RP2040, from the RP2040/RP2350 family. Other key parts include the OLED-SSD1306. By type, the board carries 6 relays, 2 ICs, 2 resistors and 1 capacitor.

It belongs with the keyboards designs in this gallery.

From the project

My Submission for HackClub!!

Every developer's macropad. Powered by Conductor AI.

by Alexander Wondwossen (@thealxlabs) — Grade 7, Toronto 🇨🇦

Nyx Pad is a custom 6-key macropad — think DIY Stream Deck — that talks to Conductor, my own AI integration CLI. Press a key and Nyx (the LocalCode mascot) animates on the OLED while Conductor fetches weather, crypto prices, GitHub stats, and more.

3 profiles · hold actions · Pomodoro timer · screensaver · boot greeting

Main components on the Nyxpad

XIAO-RP2040OLED-SSD1306

Nyxpad bill of materials (BOM)

12 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040
U1
1
OLED-SSD1306
U2
1
EC11
ENC1
6
SW_MX
K1, K2, K3, K4, K5, K6
1
100nF
C1
2
4.7k
R1, R2

Nyxpad design files

The KiCad project lives in the thegreatalxx/nyxpad repository on GitHub; these links point at the commit this page was built from.

Nyxpad: common questions

What microcontroller does the Nyxpad use?

The Nyxpad is built around the XIAO-RP2040, from the RP2040/RP2350 family.

How big is the Nyxpad PCB?

The Nyxpad measures 80 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Nyxpad?

12 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Nyxpad design files?

From the thegreatalxx/nyxpad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Nyxpad design in my own project?

Yes, under the terms of its MIT license, which thegreatalxx chose for the repository.

Can I test firmware for the Nyxpad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards