MUX1

TheJustMoose·74HCPU·hard/MUX1/MUX1.kicad_pcb

MUX1 PCB layout, top view — open source board by TheJustMoose

About the MUX1 PCB

MUX1 is an open source PCB design by TheJustMoose, published on GitHub. It is a 2-layer board measuring 58.4 × 21.3 mm, with 7 components from 5 distinct parts.

Other key parts include the 74LS153. By type, the board carries 5 connectors, 1 IC and 1 capacitor.

From the project

Handmade CPU. See README.md

Not a very scary instruction set discrete logic processor.

8 bit data 16 bit address / 64KB RAM 17 bit address (in V register) / 128KW Dual Bank Video RAM 16 instructions 8 data registers and 4 pointer registers in 2 banks 1 flags register in IO port 32 input ports and 32 output ports (You can write a constant to the first 8 ports. Only registers can be written to the remaining ports.) Assembled from 74HCxx series ICs!

MUX1, from the project README
From the project README

Main components on the MUX1

MUX1 bill of materials (BOM)

7 components, 5 distinct parts.

QtyPartRefs
1
74LS153
U1
2
Conn_01x04_Male
J1, J2
1
Conn_01x03_Male
J3
2
Conn_01x02_Male
J4, J5
1
0.1uF
C1

MUX1 design files

The KiCad project lives in the TheJustMoose/74HCPU repository on GitHub; these links point at the commit this page was built from.

MUX1: common questions

How big is the MUX1 PCB?

The MUX1 measures 58.4 × 21.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MUX1?

7 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the MUX1 design files?

From the TheJustMoose/74HCPU repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MUX1 design in my own project?

The repository has no license, so all rights stay with TheJustMoose. Use it as a reference, and ask the author before reusing the design.

More boards in 74HCPU