27 open source boards using the 74LS153
Real designs built with the 74LS153, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MyCpu
fortinsylvain
194.5 × 188.6 mm156 parts4LMIT18Amiga-Boot-Selector
reinauer
20.6 × 57.4 mm7 parts2LNo license18Microdigital - TK 2000
clemarfolly
236.8 × 169.8 mm195 parts2LNo license17Tandy-Color-Computer-Multi-Pak
djtersteegc
203.4 × 139.1 mm62 parts2LMIT16Gb cartridge rom mbc ram
roybaer
50 × 61 mm18 parts2LNo license16TruthTable
attoparsec
20 × 110 mm25 parts2LCC0-1.012Main
ceteras
299.2 × 180 mm352 parts2LMIT11Main
ceteras
299.2 × 180 mm434 parts2LMIT5Memotron
inmbolmie
104.9 × 81.8 mm44 parts2LGPL-3.04JFF
herraa1
250 × 150 mm132 parts2LGPL-3.02Lomax ColorMagic Redux
RichCini
254 × 137.7 mm148 parts4LNo license1PCB EDU
AGH-Logic-Unit
281.2 × 157.9 mm125 parts4LNo license18 Bit Computer
rick0x00
50 × 100 mm449 parts2LApache-2.00SillyTestRom
smaldragon
93 × 59.4 mm112 parts2LNo license0Amdcpu
fjalvingh
240 × 190 mm43 parts2LNo license0E800j grafix
codepainters
30.5 × 38.1 mm9 parts2LNo license0- schematic only · 49 parts
4BitCPU
DylanMcKaige
49 partsNo license0 TK2000 InterfaceDeDrive
clemarfolly
65.1 × 92.8 mm18 parts2LNo license17ADV-16 CPU
abzman
228.1 × 172.7 mm111 parts2LUnlicense4Board
CatspersCoffee
254 × 134.6 mm163 partsCustom license0Fdc01
felge1966
170.2 × 96.5 mm40 parts2LAGPL-3.00Spi master
nrivard
76.2 × 43.2 mm12 parts2LMIT10Unidade Logica e Aritmetica (ULA)
aragonxpd154
217.6 × 127.8 mm61 parts2LGPL-3.01ALU
rick0x00
100 × 50 mm34 parts2LApache-2.00S100 Z80 V5
CatspersCoffee
254 × 134.6 mm138 partsCustom license0MUX4x1
TheJustMoose
87.6 × 65.4 mm30 parts2LNo license2MUX1
TheJustMoose
58.4 × 21.3 mm7 parts2LNo license2
How designs wire the 74LS153
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the 74LS153 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 11 of 22 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: 5V 100% |
|
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MyCpu by fortinsylvain, Amiga-Boot-Selector by reinauer, Microdigital - TK 2000 by clemarfolly and Tandy-Color-Computer-Multi-Pak by djtersteegc.
The 74LS153 in open source designs
The gallery holds 27 open source boards using the 74LS153 from 23 GitHub repositories; a typical one measures about 182.3 × 118.9 mm and carries around 61 components.
88% are two-layer designs, the rest use four layers or more, and 48% carry an open source license.
The most starred is MyCpu by fortinsylvain.
Parts used alongside the 74LS153
What boards using the 74LS153 are built for
74LS153: common questions
Where can I find a 74LS153 reference design?
Each of the 27 boards on this page is a real design using the 74LS153. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS153 VCC pin?
The VCC pin has a decoupling capacitor on 11 of 22 designs, most often 100 nF. Counted from the KiCad layouts of 22 open source designs using the 74LS153.
What parts are used alongside the 74LS153?
The 74LS08, 74LS04, 74LS74, 74LS32 and 74LS00 appear in the most repositories here.
How big is a typical board using the 74LS153?
The median is 182.3 × 118.9 mm, and 88% are two-layer designs.
What is the most popular open source board using the 74LS153?
By GitHub stars, MyCpu by fortinsylvain, with 18 stars.
Can I simulate one of these boards using the 74LS153 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.