Reg
About the Reg PCB
Reg is an open source PCB design by TheJustMoose, published on GitHub. It is a 2-layer board measuring 71.1 × 42.6 mm, with 38 components from 13 distinct parts.
Other key parts include the 74LS193, 74HC245 and 74LS27. By type, the board carries 13 resistors, 10 connectors, 8 diodes, 4 ICs and 3 capacitors.
From the project
Handmade CPU. See README.md
Not a very scary instruction set discrete logic processor.
8 bit data 16 bit address / 64KB RAM 17 bit address (in V register) / 128KW Dual Bank Video RAM 16 instructions 8 data registers and 4 pointer registers in 2 banks 1 flags register in IO port 32 input ports and 32 output ports (You can write a constant to the first 8 ports. Only registers can be written to the remaining ports.) Assembled from 74HCxx series ICs!
Main components on the Reg
Reg bill of materials (BOM)
38 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74LS193 | SOP-16_3.9x9.9mm_P1.27mm | U1, U4 |
| 1 | 74HC245 | SOP-20_7.5x12.8mm_P1.27mm | U2 |
| 1 | 74LS27 | SO-14_3.9x8.65mm_P1.27mm | U3 |
| 2 | Conn_01x08_Male | PinHeader_1x08_P2.54mm_Horizontal | J1, J2 |
| 3 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Horizontal | J3, J5, J6 |
| 1 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 4 | Conn_01x01_Male | PinHeader_1x01_P2.54mm_Horizontal | J7, J8, J9, J10 |
| 8 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | 0.1uF | C_Axial_L3.8mm_D2.6mm_P12.50mm_Horizontal | C1, C3 |
| 1 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10k | R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1 |
| 8 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R6, R7, R8, R9 |
| 4 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12, R13 |
Reg design files
The KiCad project lives in the TheJustMoose/74HCPU repository on GitHub; these links point at the commit this page was built from.
Reg: common questions
How big is the Reg PCB?
The Reg measures 71.1 × 42.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Reg?
38 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Reg design files?
From the TheJustMoose/74HCPU repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Reg design in my own project?
The repository has no license, so all rights stay with TheJustMoose. Use it as a reference, and ask the author before reusing the design.
More boards in 74HCPU
Regs v6
160 × 99.1 mm59 parts2LNo license2
MUX8x1-v5
99.1 × 99.1 mm47 parts4LNo license2
MUX8x1-100x150-r2
160 × 99.1 mm44 parts2LNo license2
ROM
149.9 × 99.1 mm40 parts2LNo license2
MUX
152.4 × 152.4 mm38 parts2LNo license2
MUX4x1
87.6 × 65.4 mm30 parts2LNo license2
RAM
99.1 × 99.1 mm26 parts2LNo license2
MUX16bit
99.1 × 99.1 mm24 parts2LNo license2
MUL1 SMD
83.8 × 27.3 mm13 parts2LNo license2
AND
81.3 × 31.8 mm10 parts2LNo license2
MUX1
58.4 × 21.3 mm7 parts2LNo license2