Garage Opener Logicer

TheKeno·Garage_Opener_Logicer·hardware/garage_controller/garage_controller.kicad_pcb

Garage Opener Logicer PCB layout, top view — open source AVR/Arduino board by TheKeno

About the Garage Opener Logicer PCB

Garage Opener Logicer is an open source AVR/Arduino PCB design by TheKeno, published on GitHub. It is a 2-layer board measuring 120 × 90 mm, with 64 components from 35 distinct parts.

Its main chip is the ATmega328P-PU, from the AVR/Arduino family. By type, the board carries 28 resistors, 12 connectors, 10 capacitors, 6 diodes, 3 transistors and 1 IC.

It belongs with the power & battery and usb & debug tools designs in this gallery.

From the project

A barebones board for GarageOpenerLogicerR6`: an ATmega328P on a 16 MHz crystal, powered from USB-C, with connectors for everything in the garage. The chip is pinned out exactly like an Uno, so the sketch runs unchanged.

A barebones board for GarageOpenerLogicerR6`: an ATmega328P on a 16 MHz crystal, powered from USB-C, with connectors for everything in the garage. The chip is pinned out exactly like an Uno, so the sketch runs unchanged.

Open garagecontroller.kicadpro in KiCad 10. The schematic passes ERC with no errors or warnings. The PCB has its outline, all footprints placed and every pad on its net, and it matches the schematic exactly (DRC with schematic parity). It is not routed yet: the only DRC items left are the 141 unrouted connections.

Main components on the Garage Opener Logicer

Garage Opener Logicer bill of materials (BOM)

64 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATmega328P-PU
U1
2
2N7000
Q1, Q2
1
2N3904
Q3
1
16MHz
Y1
1
USB-C 5V
J1
1
ISP
J2
1
FTDI
J3
1
LCD I2C
J4
1
ENCODER
J5
1
GUI BUTTON
J6
1
SONAR (HC-SR04)
J7
1
DOOR SWITCH
J8
1
LDR
J9
1
OPENER
J10
1
PARK ASSIST
J11
1
ESP8266
J12
1
0.75A hold
F1
1
SRD-05VDC-SL-C
K1
1
RESET
SW1
1
green
D1
Show 15 more
QtyPartRefs
3
1N4148
D2, D3, D5
1
red
D4
1
BAT85
D6
1
100uF 10V
C1
7
100nF
C2, C3, C4, C5, C8, C9, C10
2
22pF
C6, C7
2
5.1k
R1, R2
5
1k
R3, R5, R9, R11, R15
3
10k
R4, R12, R20
4
4.7k
R6, R7, R10, R27
3
100
R8, R13, R18
3
100k
R14, R19, R28
2
330
R16, R17
3
2.2k
R21, R23, R25
3
3.3k
R22, R24, R26

Garage Opener Logicer design files

The KiCad project lives in the TheKeno/Garage_Opener_Logicer repository on GitHub; these links point at the commit this page was built from.

Garage Opener Logicer: common questions

What microcontroller does the Garage Opener Logicer use?

The Garage Opener Logicer is built around the ATmega328P-PU, from the AVR/Arduino family.

How big is the Garage Opener Logicer PCB?

The Garage Opener Logicer measures 120 × 90 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Garage Opener Logicer?

64 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Garage Opener Logicer design files?

From the TheKeno/Garage_Opener_Logicer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Garage Opener Logicer design in my own project?

The repository has no license, so all rights stay with TheKeno. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Garage Opener Logicer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards