MacroPad
TheLionBro024·MacroPad
About the MacroPad PCB
MacroPad is an open source AVR/Arduino PCB design by TheLionBro024, published on GitHub. It is a 2-layer board measuring 77 × 95.5 mm, with 36 components from 12 distinct parts.
Its main chip is the ATMEGA32U4-A, from the AVR/Arduino family. By type, the board carries 10 switches, 9 diodes, 8 capacitors, 6 resistors, 1 IC and 1 crystal.
It belongs with the keyboards designs in this gallery.
From the project
Design for a simple Macro Pad (4 now)
Main components on the MacroPad
MacroPad bill of materials (BOM)
36 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA32U4-A ATmega32U4-A | TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | Crystal | Crystal_HC49-U_Vertical | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 9 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +1 |
| 1 | SW_Push | SW_PUSH_6mm | SW10 |
| 9 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
| 1 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 2 | 22P 22p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 5 | 0.1U 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C7, C8 |
| 2 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 22 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 5.1K 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
MacroPad design files
The KiCad project lives in the TheLionBro024/MacroPad repository on GitHub; these links point at the commit this page was built from.
- LayoutMacroPad.kicad_pcb
- SchematicMacroPad.kicad_sch
- BOMNew folder/PCBWay_bom.csv
MacroPad: common questions
What microcontroller does the MacroPad use?
The MacroPad is built around the ATMEGA32U4-A, from the AVR/Arduino family.
How big is the MacroPad PCB?
The MacroPad measures 77 × 95.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MacroPad?
36 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MacroPad design files?
From the TheLionBro024/MacroPad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MacroPad design in my own project?
The repository has no license, so all rights stay with TheLionBro024. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MacroPad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k