EasyPI WiFi

TheOtherTwinCoder·easyPI_WiFi·Shield/easyPICO WiFi.kicad_pcb

EasyPI WiFi PCB layout, top view — open source board by TheOtherTwinCoder

About the EasyPI WiFi PCB

EasyPI WiFi is an open source PCB design by TheOtherTwinCoder, published on GitHub. It is a 2-layer board measuring 59.1 × 66.1 mm, with 11 components from 6 distinct parts.

Other key parts include the RM2. By type, the board carries 8 connectors, 2 resistors and 1 IC.

It belongs with the iot & wireless and dev boards & breakouts designs in this gallery.

From the project

I made easyPI WiFi for one simple reason - its customizability! Most custom board related to the Pi Pico don't have the ability to use shields (especially due to the lack of some pins, like pins 25 and 29) - which isn't great for adding features to your board (from just the regul

I made easyPI WiFi for one simple reason - its customizability! Most custom board related to the Pi Pico don't have the ability to use shields (especially due to the lack of some pins, like pins 25 and 29) - which isn't great for adding features to your board (from just the regular features of a microcontroller!)

- EVERY GPIO pin included with the RP2040 - such as pins 25 and 29 - while not losing out on other pins, like the ADC pins! - RPI_RM2 compatibility with the shield, allowing for WiFi and Bluetooth - USB-C rather than the normally used Micro-USB with Picos - 264 KB of on-chip SRAM -…

EasyPI WiFi, from the project README
From the project README

Main components on the EasyPI WiFi

EasyPI WiFi bill of materials (BOM)

11 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RM2
U1
2
CONN_01X03_SOCKET
Conn_01x03_Socket
J1, J2
2
CONN_01X01_SOCKET
Conn_01x01_Socket
J3, J4
4
CONN_01X20_SOCKET
Conn_01x20_Socket
J8, J9, J10, J11
1
470 OhM
R1
1
10 kOhm
R2

EasyPI WiFi design files

The KiCad project lives in the TheOtherTwinCoder/easyPI_WiFi repository on GitHub; these links point at the commit this page was built from.

EasyPI WiFi: common questions

How big is the EasyPI WiFi PCB?

The EasyPI WiFi measures 59.1 × 66.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EasyPI WiFi?

11 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EasyPI WiFi design files?

From the TheOtherTwinCoder/easyPI_WiFi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the EasyPI WiFi design in my own project?

The repository has no license, so all rights stay with TheOtherTwinCoder. Use it as a reference, and ask the author before reusing the design.

Similar boards