CW308 UFO Kicad target template Dreg Port
therealdreg·CW308_UFO_Kicad_target_template_Dreg_Port·CW308T_AVR_Kicad_Dreg_Port/CW308T_AVR.kicad_pcb
About the CW308 UFO Kicad target template Dreg Port PCB
CW308 UFO Kicad target template Dreg Port is an open source AVR/Arduino PCB design by therealdreg, published on GitHub under the MIT license. It is a 2-layer board measuring 52.3 × 68.1 mm, with 14 components from 6 distinct parts.
Its main chip is the ATmega328P-PU, from the AVR/Arduino family. By type, the board carries 4 resistors, 3 connectors, 3 capacitors and 1 IC.
From the project
chipwhisper UFO CW308 TARGET template for KiCad & EASYEDA PRO
chipwhisper UFO CW308 TARGET template for KiCad with Dreg port (and easyeda file to import)
- ENIG - PCB Size: 52.3mm x 64.6mm - 2 layers - male pins
- 800-10-020-10-001101 - Preci-dip - https://www.mouser.es/ProductDetail/437-8001002010001101
ProPrjCW308TAVRKicadDregPort2026-06-29.epro2

Main components on the CW308 UFO Kicad target template Dreg Port
CW308 UFO Kicad target template Dreg Port bill of materials (BOM)
14 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega328P-PU | 28P3 | U1 |
| 3 | 20-Pin Header | 801-87-020-10-001101 | J1, J2, J3 |
| 3 | Mounting-Hole-RND-Altium | Mounting-Hole-RND-Altium | MH3, MH4, MH5 |
| 3 | approved sub OK | CAPC1608X90N | C1, C2, C3 |
| 3 | Thick Film | RESC1608X55N | R1, R2, R4 |
| 1 | Thick Film | RESC2012X70N | R3 |
CW308 UFO Kicad target template Dreg Port design files
The KiCad project lives in the therealdreg/CW308_UFO_Kicad_target_template_Dreg_Port repository on GitHub; these links point at the commit this page was built from.
CW308 UFO Kicad target template Dreg Port: common questions
What microcontroller does the CW308 UFO Kicad target template Dreg Port use?
The CW308 UFO Kicad target template Dreg Port is built around the ATmega328P-PU, from the AVR/Arduino family.
How big is the CW308 UFO Kicad target template Dreg Port PCB?
The CW308 UFO Kicad target template Dreg Port measures 52.3 × 68.1 mm, has 2 copper layers and is 0.41116 mm thick.
How many components are on the CW308 UFO Kicad target template Dreg Port?
14 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the CW308 UFO Kicad target template Dreg Port design files?
From the therealdreg/CW308_UFO_Kicad_target_template_Dreg_Port repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CW308 UFO Kicad target template Dreg Port design in my own project?
Yes, under the terms of its MIT license, which therealdreg chose for the repository.
Can I test firmware for the CW308 UFO Kicad target template Dreg Port without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k