Beaglebone usbasp cape
thinnect·beaglebone-usbasp-cape
About the Beaglebone usbasp cape PCB
Beaglebone usbasp cape is an open source PCB design by thinnect, published on GitHub under the Custom license license. It is a 2-layer board measuring 86.4 × 54.6 mm, with 18 components from 8 distinct parts.
Other key parts include the BEAGLEBONEBLACK, SN74CBTLV3253 and INA219. By type, the board carries 8 resistors, 4 ICs, 4 capacitors and 2 connectors.
From the project
Cape for BeagleBone that can be used for programming and logging AVR devices using usbasp connector
Cape for BeagleBone that can be used for programming and logging AVR devices using usbasp connector.
P8 B23 -> P8 B19 [GPIO022] P8 B25 -> P8 B26 [GPIO129] P8 B5 -> P8 B7 [GPIO2_2 ]
MISO and MOSI pins are swapped, it can be corrected on software side. TODO: how to do it.
Main components on the Beaglebone usbasp cape
Beaglebone usbasp cape bill of materials (BOM)
18 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BEAGLEBONEBLACK | BEAGLEBONEBLACK | U1 |
| 2 | SN74CBTLV3253 | SO16N | U2, U3 |
| 1 | INA219 | SO8N | U4 |
| 2 | CONN_5X2 | PIN_ARRAY_5x2 | P5, P6 |
| 4 | 100N 100n | SM0603_Capa | C1, C2, C3, C4 |
| 5 | 10K 10k | SM0603_Resistor | R1, R2, R3, R5, R6 |
| 1 | 0.2R | SM1206 | R4 |
| 2 | 3.3K 3.3k | SM0603_Resistor | R7, R8 |
Beaglebone usbasp cape design files
The KiCad project lives in the thinnect/beaglebone-usbasp-cape repository on GitHub; these links point at the commit this page was built from.
Beaglebone usbasp cape: common questions
How big is the Beaglebone usbasp cape PCB?
The Beaglebone usbasp cape measures 86.4 × 54.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Beaglebone usbasp cape?
18 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Beaglebone usbasp cape design files?
From the thinnect/beaglebone-usbasp-cape repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Beaglebone usbasp cape design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.