Fairy-Light-Controller
thismatters·Fairy-Light-Controller·hardware/LED_Strand_Interface.kicad_pcb
About the Fairy-Light-Controller PCB
Fairy-Light-Controller is an open source AVR/Arduino PCB design by thismatters, published on GitHub under the MIT license. It is a 2-layer board measuring 69.9 × 106.7 mm, with 37 components from 16 distinct parts.
Its main chip is the ATMEGA328P-P, from the AVR/Arduino family. Other key parts include the IR_RECEIVER. By type, the board carries 13 resistors, 9 connectors, 8 transistors, 4 capacitors, 2 ICs and 1 crystal.
From the project
Initially when we bought fairy lights (sorry for the amazon link, I hope it stays valid for a while) they came with crappy wall warts which had to be plugged and unplugged daily; these wall warts were of such poor quality that the barrel plug which recieved the light strand would
Initially when we bought fairy lights (sorry for the amazon link, I hope it stays valid for a while) they came with crappy wall warts which had to be plugged and unplugged daily; these wall warts were of such poor quality that the barrel plug which recieved the light strand would inevitably break. Totally unacceptable. The goal of this project is to provide an easy interface for controlling and powering many strands of LED fairy lights.
Main components on the Fairy-Light-Controller
Fairy-Light-Controller bill of materials (BOM)
37 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA328P-P | DIP-28__300 | IC1 |
| 1 | IR_RECEIVER | TSOPxx | U1 |
| 8 | Darl_NPN_ps | SOT-223-Transistor | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 1 | CRYSTAL_WITH_CAPS | Crystal_Vertical_3Pin | X1 |
| 8 | BARREL_JACK | KLDX-SMT | CON1, CON2, CON3, CON4, CON5, CON6, CON7, CON8 |
| 1 | CONN_4 | Socket_VH-RM3-96mm_Lock_4pin_straight | P1 |
| 1 | 100U | C_1206_HandSoldering | C1 |
| 1 | 10U | C_0805_HandSoldering | C2 |
| 1 | 100n | C_0805_HandSoldering | C3 |
| 1 | 1u | C_Radial_D5_L11_P2.5_bigpad | C4 |
| 8 | 0.27 | Resistor_Horizontal_RM10mm | R1, R2, R3, R4, R5, R6, R7, R8 |
| 1 | 0 | R_0805_HandSoldering | R9 |
| 1 | 100 | R_0805_HandSoldering | R10 |
| 1 | 10k | R_0805_HandSoldering | R11 |
| 1 | PD_RR8_10k | Resistor_Array_SIP8 | RR1 |
| 1 | PU_RR8_10k | Resistor_Array_SIP8 | RR2 |
Fairy-Light-Controller design files
The KiCad project lives in the thismatters/Fairy-Light-Controller repository on GitHub; these links point at the commit this page was built from.
Fairy-Light-Controller: common questions
What microcontroller does the Fairy-Light-Controller use?
The Fairy-Light-Controller is built around the ATMEGA328P-P, from the AVR/Arduino family.
How big is the Fairy-Light-Controller PCB?
The Fairy-Light-Controller measures 69.9 × 106.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fairy-Light-Controller?
37 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Fairy-Light-Controller design files?
From the thismatters/Fairy-Light-Controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Fairy-Light-Controller design in my own project?
Yes, under the terms of its MIT license, which thismatters chose for the repository.
Can I test firmware for the Fairy-Light-Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k